This Abrasive Nylon Cup Brush 130mm is perfect for deburring, smoothing, edging and fine sanding of small to large parts. The Cup Brush consists of a blue plate in which nylon threads are passed through the silicon carbide. The brush has an M14 connection thread and therefore fits all common angle grinders. Optionally, you can also order an M14 -10mm adapter with which you can clamp the Cup Brush into your stand boring machine. You will find the adapter at the top of the selection selection. Into the stator boring machine, you have a fantastic deburring tool with an extremely long service life. The nylon threads always have an even grinding effect since new abrasives are constantly released by the wear of the nylon thread. With the Osborn Cup Brush you can process steel, stainless steel, brass, copper, bronze and also aluminum. Dimensions of Abrasive Nylon Cup Brush 130mm:   Diameter of grinding plate: 130 mm  Grain size: K120  Connection thread: M14 (shaft angle grinder)  Bristle length: 30 mm Technical characteristics of the Abrasive Nylon Cup Brush 130mm   Nylon filaments interspersed with silicon carbide   Uniform grinding effect (new abrasive material is constantly released by wear)   High elasticity and flexibility without risk of breakage   No clogging of the resting surface with working residues   Resistant to weak acids and alkalis   Very long service Made in Germany   life with optimal conditions  Application areas of the Abrasive Nylon Cup Brush 130mm   Lacquering and structuring of wood   Suitable for steel, stainless steel, brass, copper, bronze and aluminum   Rusting or descaling of metal surfaces   For deburring, smoothing, and fine grinding from small to large components   Break and crimp edges   Aluminum profiles   Deburring with the Osborn dish brush 130mm

This oil-based abrasive paste with synthetic diamonds is suitable for all polishing and grinding work on hard materials such as ceramics, glass, metals and hardened steels. The diamond grinding paste is delivered in a syringe and is therefore very easy to dose. We use the grinding paste to grind valve seats on hissing taps or to grind the valves on combustion engines. There are 2 different grit sizes to choose from: 20µm (extra fine) and 40µm (fine). 1 µm = 1/1000 mm. Properties of the diamond grinding paste Content: 5g Grain size: 20µm (extra fine) / 40µm (fine)

Here you will find all spare parts for the Power Coat 4 PRO powder coating gun. You can make your selection above in the variant menu. Regardless of whether the parts have been lost or are defective, you can get all the spare parts you need for the coating gun from us. The following spare parts are available to choose from. Handpiece Power Coat Pro 4 Pressure regulator Water separator Charging channel TeflonCharging strip stainless steel Plastic barrel White Barrel holder aluminum Inner nozzle old version Red Inner nozzle new version  All spare parts for the powder gun are in stock and can be shipped immediately.

With the 90 ° deburring head made of HSS steel, you can also deburr very small holes cleanly and quickly. The deburring head is clamped in a handgripper handle (not included in the scope of delivery) and can then be rotated by hand. The countersinks are sharpened, so you can deburr holes from 0.5mm upwards. You do not need a machine or device. One can take the deburring head with the handle in the one hand and the workpiece in the other hand. The deburring head is particularly well suited for technical modeling. Bengs Modellbau has been using the deburring head with the head diameter 6.30mm for years. Delivery without grip (here you come to the handle) The following deburring head HSS 90 ° countersink diameters are available: Deburring head HSS 90 ° Head diameter: 6.30mm Deburring head HSS 90 ° Head diameter: 8,30mm

Blade hand deburring tool small Hand burr handle with rotatable, replaceable blades. Easy handling, the blade of the Entgraters adapts itself automatically to the contours of the workpiece. The hand deburrer is made of break-resistant plastic. The hand tiller small is particularly suitable for fine work in model building on all materials. We supply the hand tiller small with a blade. Blade hand deburring tool universal The universal hand deburrer with a standard blade is suitable for deburring sheet metal, pipes, milling parts and rotating parts. The universal deburrer is suitable for all materials. The hand deburrer comes with a blade. We recommend this handle for the deburring head 90 °. Universal handgripper is made of aluminum. Here you come to the deburring head Hand taps are suitable both for deburring bores and for deburring edges on components. You can deburr brass, copper, steel, stainless steel, plastics and aluminum with our hand deburrers. You can also order spare blades for hand trenches in our shop. Just select the replacement bell.

These dies for metric fine threads are made from HSS steel. We only supply you with cutting dies and taps of industrial quality, so that you can enjoy your tools for a long time. Fine threads are well suited for use in model making because the threads look more delicate. Bengs Modellbau likes to use fine threads on tank caps, coolant caps, screw connections or adjustment spindles. You can of course also order matching die holder in the Bengs model shop. Please always use cutting oil when using fine thread dies. Industrial quality The following thread cutting dies are always available: Other sizes available at short notice upon request. Fine thread dies  Die cutting iron M4x0.5 / dimensions 20mm x 5mm  Die cutting iron M5x0.5 / dimensions 20mm x 5mm  Die cutting iron M6x0.5 / dimensions 20mm x 7mm  Die cutting iron M6x0.75 / dimensions 20mm x 7mm  Die cutting iron M7x0.5 / dimensions 25mm x 9mm  Die cutting iron M8x0.75 / dimensions 25mm x 9mm  Die cutting iron M8x1 / dimensions 25mm x 9mm  Die cutting iron M10x1 / dimensions 30mm x 11mm

This precision vise impresses with its very clean workmanship and very little play in the clamping jaw. The screw is ground on all sides. The trapezoidal thread spindle runs in a bronze nut. The clamping jaw of the precision vice has horizontal and vertical prisms for clamping round workpieces. There are also threaded holes in the jaws to attach a stop if necessary. The screw base can be used on a pillar drill, but is also suitable for the milling machine. Precision vice variants Type 1 jaw width 50mm Total height: 50mm Jaw height: 25mm Clamps max.: 65mm Total length: 155mm Weight: 2.05kg Type 2 jaw width 60mm Total height: 50mm Jaw height: 25mm Clamps max.: 55mm Total length: 110mm Weight: 1.6kg

Belt sander BS1500 welding kit This belt sander is a medium-sized stationary device for the workbench. 1500 × 50mm sanding belts fit on the belt sander. The device is suitable both as a knife grinder for sharpening knives and for general work in metalworking. The grinder mainly consists of 6mm laser cuts. For some parts we use 8mm material. Completely assembled and welded, you get an extremely rigid main body. When assembled, the complete belt sander weighs 25.5 kilos and is secured against slipping by 4 rubber machine feet. We only offer the device as a kit. A simple inert gas welding machine is required for assembly. If you only have one electrode welding machine, this is not optimal but still possible. You will also need an M8, M6 and M5 thread cutter. All required components (except the electric motor) are included in the kit. You will receive all screws, washers, nuts and adjustment levers from us. The laser parts are pushed into one another via locking holes and then no longer need to be aligned. These locks are welded from the back and thus form a stable basic structure. Here you will find detailed assembly instructions for the BS1500 belt sander. Variant "Kit already welded" In this variant, all parts are already welded. A welding machine is no longer necessary with this variant. In addition, all holes have already been threaded. All you have to do is drill the holes for the electric motor. As these vary slightly depending on the engine used. All you need to assemble is a set of Allen keys and a set of wrenches. The motor is also not included in this variant. The following components are included with the belt sander. All laser parts for the machine frame and add-on parts 4 high-quality plastic rollers with three bearings 3 spacer sleeves for the rollers All required screws, nuts and washers Clamping levers and star grips Gas pressure spring Detailed assembly instructions Technical characteristics of the belt sander suitable for sanding belts 1500 × 50 mm Weight including 0.75 KW motor 25.5 kilos Depth: 59 cm / Width: 40 cm / Height: 51 cm Work table can be adjusted up to 45° All laser parts have locking holes and do not need to be aligned The electric motor is not included. You can find the motor at an electric motor dealer here. We tested all motors for suitability for our belt sanders. 1.1kW electric motor 230V, 2800rpm 1.5kW electric motor 230V, 2800rpm In this video you can see in detail how the kit is assembled. What is a belt sander? A belt sander, which you can buy at Bengs Modellbau, for example, is a device that can be used to sand different objects. A motor sets a sanding belt in motion and rotates it at high speed. The way it works can be roughly compared to the principle of a treadmill. A stationary belt sander also describes a device that remains statically in one place. It is either permanently installed and heavy enough to stay on the work surface without wobbling. The advantages of a stationary device are that you can sand the desired object at your leisure. While you sometimes have to carry a lot of weight with a mobile device, this is not the case with the stationary version. The device also allows precise grinding work and quick smoothing of rough sawn edges. How does a belt sander work? Belt sanders are primarily used when it comes to sanding large areas. For example, it can involve sanding work on materials such as wood, plastic or metal. Metals such as aluminum, which have no iron content, can be cleaned using the devicebest grinding. The reason for this is that the chips cause clumping on the sandpaper. In order to sand an object, it must be brought to the belt sander, which you can buy online from Bengs Modellbau, for example. As soon as you switch on the device, it allows material to be removed quickly. Depending on the grain size of the sanding belt, either a coarse or a fine grind is created. The removal of material or paint is made possible by an endless sanding belt using a stationary device, the kit of which you can buy from Bengs Modellbau, for example. This is wrapped around a drive roller and a deflection roller and is driven by a motor. What types of belt sanders are there? Sanders that work with a sanding belt can be divided into two types: the stationary version and the mobile version. At Bengs Modellbau you can buy the kit for a stationary device online. Both variants differ in their mobility on the one hand and in their functionality on the other. A stationary model always remains at a fixed workplace, while mobile devices can be moved. The stationary grinder also works in such a way that the object to be sanded is brought closer to it. In contrast, the mobile grinder is brought close to the object to be sanded. A mobile sander is also suitable for smaller jobs as it is usually lighter and more compact to ensure better handling. A stationary grinding device, on the other hand, is ideal for processing large workpieces.

This triangular honing stone made of corundum is suitable for honing HSS and solid carbide tools. Due to its small dimensions, the sharpening stone can be used well when the cutting tools are still clamped. With the whetstone, both milling cutters and turning steels can be sharpened. The whetstone is very suitable for work in model making. Dimensions corundum sharpening stone triangular: Width: 10mm Length: 100mm Material: corundum

Polishing wax in bars. We have the polishing wax in two different qualities. The white polishing wax is intended for glossy polishing and is ideal for polishing parts to a shine after mechanical treatment. The blue polishing wax is finer and suitable for the final finish. Stainless steel, aluminum and brass are particularly easy to polish to a high shine. The wax layer also ensures good preservation of the polished components. Especially with steam engines it is very popular to polish all parts to a high shine. You can use this polishing wax for all common polishing discs. Polishing paste polishing wax available in: "blue", ideal for high-gloss polish 110x35x25mm "white", ideal for glossy polish 110x35x25mm

This twist drill set consists of 49 profile-ground drill bits. The twist drills have a particularly high concentricity and pitch accuracy, as well as a precise tip grind. You can recognize profile-ground drills by their bare surface. The drill set is delivered and stored in a practical metal box. Thanks to the precise tip grinding, the drills do not run and drill round, dimensionally accurate holes. The twist drill set is not a hardware store product but rather industrial quality. Thanks to the 0.1mm gradation of the drills, you always have the right drill at hand, regardless of whether you want to make threaded holes, an undersized hole for a reamer or an oversized hole for a shaft bushing with a clearance fit. Industrial quality (not hardware store goods) You have two different drill boxes to choose from: Twist drill set from 1mm - 5.9mm drill bits 49 pieces Twist drill set of 6mm - 10mm drill bits 40 pieces Replacement Twist drill to fill the drill boxes can be found here.  

The marble pencil is made of rubber-elastic bound normal corundum and can be used universally in technical model making. The marbling pen is suitable for fine grinding and polishing, as well as for applying optical effects to brass, copper, stainless steel, steel and aluminum. The elastic bonding of the abrasive grain allows a very fine polish to be achieved.   Dimensions of marbling pen polishing abrasive body: Diameter 32mm Height of the grinding wheel 32mm Shaft diameter 6mm

This mini-round tap wrench is ideally suited for sensitive threading with small taps M 1 - M 3. The round tap wrench is made of break-resistant plastic and has hardened clamping brackets for fixing the tapper. The tool square can be adjusted by means of a knurled adjusting screw. The tap wrench is ideal for small thread diameters in technical model construction. The round winder has a diameter of 50 mm. We from Bengs Modellbau have been using the round tap wrench for many years to cut M2 and M3 threads.

Screw locking prevents all threaded parts made of metal and non-ferrous metal from unintentionally loosening the connection due to vibrations or shock loads. The liquid-applied adhesives fill gaps in the thread and harden to form a high-strength plastic. The threads secured in this way are simultaneously sealed and protected against corrosion. Resistant to all common operating media. The screw locks are temperature resistant up to 150C°. and can be used anywhere in steam model making and technical model making. The following screw locks are available: Screw locking screw adhesive (medium strength) 10g  Screw locking screw adhesive (high strength) 10g   

The conical countersinks with 3 cutting edges are sanded radially and the chip spaces are ground from the solid. The conical sinker is suitable for producing 90 ° countersinks. You can sink DIN 7991 countersunk screws here. The conical sinker is universally applicable for both steel and stainless steel as well as for non-ferrous metals such as brass and aluminum. The 90 ° counterbores have industry quality and should ideally be used in a stator drilling machine. Of course, you can also use the conical sinker with a hand drill or a cordless screwdriver. We can supply you with conical sinkers in particularly small diameters, which are very suitable for working in the field of technical modeling. Countersink 90° Maximum roundness accuracy 3 cutting industrial quality

With this high-quality self-piercing center punch from Rennsteig, very small components can be easily arranged. When you apply pressure to the center punch by hand, an internal spring tensioned and exerts the force abruptly. This means that you do not need a hammer when you start the process. This type of center punch is also called automatic punch. The impact strength can be arbitrarily set for this center punch by turning the end piece as well as it has an ergonomic end piece for high user comfort. Due to the handy size and the fine center punch tip we like to use these self-piercing center punch from Rennsteig also in our own workshop for the engraving of small parts in the technical model building. Technical data of the self-supporting center punch Minimum impact force 20 N Total length 95 mm Maximum impact force 50 N Shaft-11 mm

This diamond grinding point is suitable for sharpening and grinding a wide variety of materials such as silver steel, HSS steel and solid carbide. Even tiles can be worked on with this diamond grinding pen. The diamond grinding point has the usual quality from Kaindl and is particularly stable. The grinding point has a diameter of 6.5mm and a length of 55mm. We recommend the diamond grinding point for re-sharpening the Kaindl Woodcarvers Gold. Since the Woodcarver is made of plasma nitrided, carbonized steel with a hardness of 62 Rockwell, it cannot be sharpened with conventional files or grinding points.

You can choose between two different types of taps, namely hand thread drills (pre-cut and finished cutters) and machine thread drills (incision thread drills). Both the manual thread drills and the machine thread drills have a square cut. Fine threads are very suitable for the use of model making since the threads are much finer and more filigree. However, fine threads are also used in the automotive and pneumatic industries. We only supply taps of industrial quality from a German manufacturer. You can also find matching winds in our shop. With square cut industrial quality Made in Germany The following fine thread taps are always available: 2-thread hand thread drill for fine thread  M4x0,5  M5x0,5  M6x0,5  M6x0,75  M7x0,5  M8x0,75  M10x1 1-turn machine thread tap for fine threads  M4x0,5  M5x0,5  M6x0,5  M6x0,75  M8x0,75  M8x1  M10x1

The AT2000 universal gas cartridge fits the CFH turbo burner. With this can you can work with the burner for between 1.5 and 7 hours depending on the flame size. The universal gas cartridge can also be used on other devices such as weed burners or other soldering devices. 30% propane, 70% butane. Contents 600 ml/ 330g Canister type: AT2000 can standardized according to EN 417.      

Hss Milling cutter with 3 cutting edges. The face cutting geometry is suitable for dipping. Universal cutting geometry for universal use on your milling machine. The Hss cutters can be used as a long hole and end mill. Ideal for use in model making but also in industry and crafts. Suitable for all materials very good for brass, steel, stainless steel and aluminum. The milling cutters have industrial quality and are not a hardware for the building market. We have been using these milling cutters for many years in our production and on our CNC milling machines. The Hss Milling cutter are also suitable for use on the lathe. You can clamp the cutter in the drill chuck of the tailstock and then make cylindrical holes with these cutters. For example for stuffing boxes for steam engines. You have the choice between router short and router long. You can make the selection at the top of the selection menu. The dimensions can be found in the table below.   Milling cutter short Diameter cutting length overall length Shaft Diameter   1mm 3mm 34mm 6mm 1,5mm 3mm 34mm 6mm 2mm 4mm 35mm 6mm 2,5mm 5mm 36mm 6mm 3mm 5mm 36mm 6mm 4mm 7mm 38mm 6mm 5mm 8mm 39mm 6mm 6mm 8mm 39mm 6mm 8mm 11mm 43mm 8mm 10mm 13mm 50mm 10mm Milling cutter long Diameter cutting length overall length Shaft diameter 2mm 7mm 38mm 6mm 2,5mm 8mm 39mm 6mm 3mm 8mm 39mm 6mm 4mm 11mm 42mm 6mm 5mm 13mm 44mm 6mm 6mm 13mm 44mm 6mm 8mm 19mm 51mm 8mm 10mm 22mm 59mm 10mm

Grinding ball/sanding ball made of abrasive fleece with a diameter of 75mm. The abrasive material is firmly mounted on a 6mm mandrel. You can use the grinding ball in a drill press, die grinder, drill, cordless drill. The maximum speed must not exceed 10,000 revolutions/min. The sanding ball is ideal for derusting, satin finishing and removing paint from hard-to-reach areas such as internal and external curves. It is suitable for wood, steel, non-ferrous metals, plastics, and much more. applicable. Professional quality with layered fleece elements. The following grinding ball variants are available:  Fleece grinding ball ø 75mm grain 80 coarse (brown)  Fleece grinding ball ø 75mm grain 120 medium (green)  Fleece grinding ball ø 75mm grain 600 extra fine (gray)

Here you will find a selection of special powders for powder coating yourself. We have put together the most commonly used special powders in model making as powder coatings for you. All of the powder coatings we offer are suitable for both Corona powder guns and Tribo powder systems. Our powder coating is ideal for use with our Bengs model making powder coating device  These coating powders are also suitable for outdoor use and are UV resistant. With the transparent, colorless high-gloss powder coating, you can seal metallic surfaces very well, whether polished or sandblasted. The transparent coating powder is also suitable for applying a second layer of powder over an existing powder-coated surface. Metallic gloss is very often used for powder coating aluminum rims. It has a silver base color with a strong metallic effect. The powder coating is suitable for powder coating aluminum rims as well as for refining other metal parts on motorcycles, vintage cars or in technical model making. We also have 3 black variants in the shop. Deep black matt is very popular in the motorcycle sector. The matt powder coating is extremely robust and durable but at the same time has a great matt look. Deep black fine structure creates a black surface with a fine grain structure. This coating powder is ideal for building control panels, in plant construction and for details in technical model making. Black crocodile effect has an even stronger grain structure. This effect paint is often used in the off-road scene, for example for bull bars, bumpers and other structures on motorcycles and off-road vehicles.   The coating powder is filled into plastic buckets so that the powder stays permanently dry. Here you can find standard colors RAL powder coating in our shop. The following coating powders are available: Transparent colorless high gloss (250g) Metallic gloss (250g) RAL 7016 Anthracite gray fine structure matt (250g) RAL 9005 jet black super matt (250g) RAL 9005 jet black fine structure matt (250g) RAL 9005 jet black crocodile effect (250g)      

The CFH Gas Solderer Diamant M40 is a small soldering torch with a very fine and pointed flame. The burner is suitable for soft soldering with the catalytic tip and also for soft soldering larger parts directly with the flame. You can even use this torch to braze smaller parts with our silver solder  This gas soldering diamond M40 comes with a catalytic tip. The catalytic tip is screwed onto the burner and heated by the gas flame, so  this tool has been converted into a soldering iron and can be used for electrical work such as tinning cables or solder electrical components. This is particularly practical wherever there is no electricity available. You can braze components with the gas solder. We also use the gas soldering gun in our workshop to braze small, delicate parts. However, once the components reach a certain size, the heat of the flame is no longer sufficient. So if you have to solve larger components, use the Lötmeister PZ5000 . Technical data CFH gas soldering diamond M40 Dimensions: approx. W 235 x H 157 x D 23 cm Flame temperature: 1300 °C Working temperature: 650 °C Tank capacity: approx. 10 g butane gas Working time with one filling: approx. 60 minutes The gas soldering iron has a sturdy aluminum tank. The valve for adjusting the flame size can be easily operated with one hand. Both the nozzle and the catalytic tip are made of metal and are solid and durable.  

You will find profile-ground drills made of HSS steel here. These twist drills have a metallic silver color, which is caused by the fact that the drills are not just rolled like the black roll-rolled drills, but are instead carefully milled and ground from solid material. In industry and trade, only profile-ground drills made of HSS steel are used. Profile-ground twist drills are slightly more expensive to produce and are far superior to black roll-rolled drills in terms of precision and service life. The cross cutting edge of the twist drills we offer is ground and the tip grinding contributes a lot to good drilling performance. The Hss twist drills can be used in column drills, hand drills, cordless drills, lathes and milling machines. These drills are of industrial quality and are not hardware store goods! Twist drill sets with metal cassette can be found here. Profile-ground drill bits made of HSS steel Price per piece. Please select the desired size above.