These copper fittings are for soldering steam lines and water pipes and can be brazed with silver solder as well as soft soldered with soft solder. If you want to make steam pipes as straight as possible with the fittings, we recommend the copper pipes which are available from us. In addition, the fitting 90° are still suitable for exhaust, cooling lines and other constructions in model construction. The 90° bends are formed in one piece from copper tube. The copper fittings are available in different sizes. In the fittings, both the copper tube we supply and the copper tubes can be brazed. You will also find in our shop couplings and tees for pipeline construction in model construction. The fitting 90° bends from 4mm to 6mm have a wall thickness of 0.5mm. The copper arches from 6mm to 12mm have a wall thickness of 1mm. Fitting 4mm Fitting 5mm Fitting 6mm light Fitting 6mm heavy Fitting 8mm Fitting 10mm Fitting 12mm Radius Neutral Fiber 5mm 7mm 9mm 9mm 10mm 13mm 15mm Leg Length 13mm 16mm 19mm 19mm 24mm 26mm 32mm For Soldering 4mm Pipe 5mm Pipe 6mm Pipe 6mm Pipe 8mm Pipe 10mm Pipe 12mm Pipe Wall Thickness 0.5mm 0.5mm 0.5mm 1.0mm 1.0mm 1.0mm 1.0mm

soldering nipple for our single screw connection and Screw-in fitting. These soldering nipples can be used as a spare part for our screw connections. The soldering nipples are made entirely of brass and can be ordered in 4 different sizes. There are nipples for soldering 6 mm pipe, 5 mm pipe, 4 mm pipe, 3 mm pipe. The brass pipes and copper pipes we offer are particularly suitable for soldering.   Dimensions of soldering nipple for 3mm pipe: Length nipple: 7.5mm Max D.: 4.4mm Dimensions of soldering nipple for 4mm pipe: Length nipple: 9mm Max D.: 5.4mm Dimensions of soldering nipple for 5mm pipe: Length nipple: 9.5mm Max D.: 6.4mm Dimensions of soldering nipple for 6mm pipe: Length nipple: 10mm Max D.: 7.4mm

Pipe clamp CNC milled from brass. These pipe clamps are used to fix brass pipes or copper pipes on their model building facility. The pipe clamps have a 2.2 mm holes and can either use wood screws or with m2 model bolt to be attached. We have the clamps in both a single version for attaching one pipe and a double version for attaching 2 pipes. The pipe clamps are milled out of brass material with a CNC milling machine and then receive a second one from us .2 mm hole for fastening. Dimensions of the pipe clamp for 3mm pipe Single Length: 9.5mm Height: 3.7mm Width: 4mm For clamping: 1x 3mm pipe Double Length: 11.5mm Height: 3.7mm Width: 4mm For clamping: 2x 4mm pipe Dimensions of the pipe clamp for 4mm pipe Single Length: 10.5mm Height: 4.5mm Width: 4mm For clamping: 1x 4mm pipe Double Length: 13mm Height: 4.5mm Width: 4mm For clamping: 2x 4mm pipe

Connecting sleeves for soldering into the steam boiler with two different fine threads. The soldering connection sleeves are inserted into a hole with a 10 mm diameter and can then be soldered hard or soft. The beeches are made of brass MS58. Thanks to the soldering connection sleeves, the parts attached to the steam boiler have a sufficiently stable and long screw-in thread. The solder connection sleeve M6x0.75 fits our boiler accessories.The solder connection sleeve e M8x0.75 fits our safety valve with weight  The socket dimensions are always the same: Soldering diameter: 10mm Bundle diameter: 12mm Height: 10mm

These Cu braze fittings are suitable for connecting two pipes. The copper tube is inserted into the socket. Subsequently, the copper sleeves can be brazed or soft soldered. As in sanitary engineering, the sleeves are made of copper tubing. The small sleeves are ideal for model building, for example to extend steam lines or fuel lines. The sleeves for 4 mm and 5 mm pipes have a wall thickness of 0.5 mm. All sleeves from a size of 6 mm have a wall thickness of 1 mm. The following braze fittings are available: Copper Soldering Fitting I / I / Size: 4 x 4 mm / wall thickness 0,5mm Copper Soldering Fitting I / I / Size: 5 x 5 mm / wall thickness 0,5mm Copper Soldering Fitting I / I / Size: 6 x 6 mm / wall thickness 1mm Copper Soldering Fitting I / I / Size: 8 x 8 mm / wall thickness 1mm Copper Soldering Fitting I / I / Size: 10 x 10 mm / wall thickness 1mm Copper Soldering Fitting I / I / Size: 12 x 12 mm / wall thickness 1mm

With this screw-in connection you can easily create an easily detachable connection between steam pipes and water pipes. One side of this screw connection has a metric fine thread that you can screw into a boiler, steam engine or condenser. The other side of the screw-in connection is provided with a union nut and a cone solder nipple. Either a brass tube or a copper pipe can be soldered in and then screwed to the screw body using the union nut. The screw-in fitting is available for 3mm, 4mm, 5mm or 6mm pipe. The screw-in connection is made entirely of brass and seals with a cone. You can also find in our shopSolder connection sleeve into which the screw-in connections can be screwed in. Matching Soldering nipple and Coupling nuts you can also find spare parts in our online shop. Dimensions of screw-in connection for 3mm pipe: Length with nipple: 19mm Wrench size: 7mm Length without nipple: 15mm Screw-in thread: M5x0.5  Dimensions of screw-in connection for 4mm pipe: Length with nipple: 22mm Wrench size: 8mm Length without nipple: 15mm Screw thread: M6x0.75  Dimensions of screw-in connection for 5mm pipe: Length with nipple: 24mm Wrench size: 9mm Length without nipple: 15mm Screw thread: M6x0.75  Dimensions of screw-in connection for 6mm pipe: Length with nipple: 28mm Wrench size: 10mm Length without nipple: 20mm Screw-in thread: M8x0.75

With a copper solder fitting T-piece one can connect three line strings or also lead a line to an existing line strand. These Cu solder fittings are suitable for inserting copper pipe. Subsequently, the copper tee can be brazed or soft soldered with silver braze. The tees are made of copper pipe as usual in sanitary engineering and no chunky castings. Of course, our copper tubes fit into the soldering fitting tee pieces. These small tees are ideal for modeling and steam model building. The following braze fittings are available: Copper solder fitting / T-piece I / I / I / soldering in: 6 x 6 x 6 mm Copper solder fitting / T-piece I / I / I / soldering in: 8 x 8 x 8 mm Copper solder fitting / T-piece I / I / I / soldering in: 10 x 10 x 10 mm Copper solder fitting / T-piece I / I / I / soldering in: 12 x 12 x 12 mm

With this single screw connection you can easily create an easily detachable connection between steam pipes and water pipes. Ideal for steam model building. We have the single screw connection in different sizes for connecting 3mm, 4mm, 5mm or 6mm pipe. The pipe is firmly soldered into one side of the screw connection. The second pipe to be connected is soldered into the soldering nipple. Using the union nut, it can now easily be screwed to the main part. This creates an easily detachable and tight connection between steam pipes, water pipes or fuel pipes. The single screw connections are made entirely of brass and seal with a cone. The model making screw connection is suitable for soldering in copper pipes as well as for soldering in copper pipes and Brass tube. Scope of delivery: Screw connection with union nut and conical soldering nipple. Dimensions of single screw connection for 3mm pipe: Length with nipple: 18mm Wrench size: 7mm Length without nipple: 14mm  Dimensions of single screw connection for 4mm pipe: Length with nipple: 21mm Wrench size: 8mm Length without nipple: 14mm Dimensions of single screw connection for 5mm pipe: Length with nipple: 24mm Wrench size: 9mm Length without nipple: 16mm Dimensions of single screw connection for 6mm pipe: Length with nipple: 27mm Wrench size: 10mm Length without nipple: 19mm  

Soldering flange oval made of brass for soldering 4mm pipe. The flange has 2 holes with a diameter of 2.2 mm. For screwing 2 flanges, you need 2x model screws M2x6 and 2x model tree nuts M2. The slim design of the oval flange is very space-saving and easy to set up with narrow steam systems. These types of flanges can also be used when similar oval flanges have been used in the historical model. Dimensions Oval flange for 4mm tube hole spacing 11mm 2 holes 2,2mm Outside diameter 16mm

Cap nuts for our Simple screw connection and Screw-in fitting. These union nuts can be used as a spare part for our screw connections. The union nuts are made entirely of brass and can be ordered in 4 different sizes. There are union nuts for the screw connections for soldering 6 mm pipe, 5 mm pipe, 4 mm pipe, 3 mm pipe. The brass pipes and copper pipes we offer are particularly suitable for soldering.   Dimensions Coupling nut for 3mm pipe: Length of union nut: 6.5mm Wrench size: 7mm Dimensions of union nut for 4mm pipe: Length of union nut: 8mm Wrench size: 8mm Dimensions Coupling nut for 5mm pipe: Length of union nut: 8mm Wrench size: 9mm Dimensions Coupling nut for 6mm pipe: Length of union nut: 9mm Wrench size: 10mm

Flanges for steam model construction for soldering in steam and water pipes. All sizes have 4 x 2.2mm holes for screwing with M2 screws (SW 4mm or SW 3mm). The flanges can be pushed onto a steam or water line and can be brazed or soldered. These flanges make their model building engine look true to the original. The enclosed Abil paper seal ensures the required tightness. Included in the delivery are: 10 flanges 8 Seals     Flansch A Flansch B Durchmesser 16mm 18mm Höhe 5mm 6mm Zum Einlöten von 4mm Rohr 6mm Rohr Teilkreis 11mm 13mm On request, we can supply you with the appropriate screws and nuts M2x6 Modellbauschrauben (SW 3) Modellbaumutter M2.The screws and nuts are not included in the scope of delivery.

With this copper fitting you can connect pipes at 45° Lay angles. This fitting is a so-called inside/outside fitting. On one side of the sheet it has the specified internal dimensions. on the other side the fitting has the specified dimensions. These fittings are mainly used for drinking water installations, heating installations and liquid gas installations. Due to their small size, they are also ideal for technical model making. Copper solder fitting / 45° Angle I/A 6mm Copper solder fitting / 45° Angle I/A 8mm Copper solder fitting / 45° Angle I/A 10mm Copper solder fitting / 45° Angle I/A 12mm  

Adapter from flange to screw connection 4mm pipe. For screwing to our flanges for 4mm pipe.   Dimensions adapter flange Flange Ø: 16 mm Hole circle Ø: 11 mm 4 holes Ø: 2.2 mm Total length: 17.5mm  Scope of delivery 1 flange with thread M6x0.5 1 soldering nipple 4mm 1 union nut  

With a T-screw connection you can bring three cable runs together or lead a cable to an existing cable run. The T-screw connection can be loosened again at any time. The T-bolts are made entirely of brass. The side exit is screwed and can be replaced. The pipe to be connected is soldered into the conical soldering nipples and can then be screwed to the main body using the union nut. You can get the T-screw connection from us in two variants. Dimensions of T-connection for 4/3/4mm pipe: Length with nipple: 36mm Height with nipple: 25mm Length without nipple: 21mm Height without nipple: 18mm Dimensions of T-connection for 4/4/4mm pipe: Length with nipple: 36mm Height with nipple: 226mm Length without nipple: 21mm Height without nipple: 18mm