Cotter pin punch set with guide sleeve in a slim design, with corded guide sleeve and hardened insert mandrel. Size 0.9 − 1.4 - 1.8 - 2.4 - 2.8 - 3.9 with loose guide sleeve − Size 4.9 and 5.9 with fixed shaft. Ideally suited for technical model making. The pin punch set is of industrial quality. Material: Chrome vanadium steel.

Developed by the Kaindl company for professional work in the craft, creative and carving sectors, the wood tarpaulin enables quick and clean surface removal on all soft and hardwoods. With this carving cutter, large material removals as well as fine work are possible. This means that it can be used in various areas of wood processing, as well as in playground, garden construction and tree care. The Wood-Plane is also ideal for removing tree bark or removing sapwood. In the carving area for smoothing and adjusting sawn surfaces. In the creative area for the direct elaboration of bowls, reliefs, patterns and shapes. Unique advantages of Multi-Plane HD Suitable for angle grinders 115/125mm For manual carving/milling of wood CNC manufactured from one piece of high-strength aluminum Cutting elements made of carbide (HW) can be easily replaced and resharpened Dimensions: 115 x 20 x 22.2mm, nmax.: 14,500 1/min Quality tool “Made in Germany” Span thickness limited for low-kickback work in manual feed (MAN) Technical features: Dimensions: 115 x 20 x 22.2mm Nmax: 14,500 1/min Cutting material: HW (carbide, ground) Tightening torque: 4 Nm (T15 screw in M4 x 11mm) Use: hand-held milling tool “MAN”

We provide you with combination wrenches with particularly small wrench sizes specifically for technical model making. The combination wrenches are made of chrome vanadium steel and are therefore extremely hard and suitable for even the toughest use. The combination wrenches are of industrial quality.Combine wrenches made of chrome-vanadium steel, chrome-plated Wrench size 3mm  Wrench size 4mm  Wrench size 5.5mm  Wrench size 7mm 

These dies for inch fine threads are made from HSS steel. The thread UNEF 1/4 x 32 is used for glow plugs for model combustion engines. All common glow plugs have this inch thread. You can use the die to re-cut the thread on existing glow plugs or for thread cutting if you want to make your own glow plug. We only supply you with cutting dies and taps of industrial quality, so that you can enjoy your tools for a long time. You can of course also order suitable cutting die holders in the Bengs model making shop. Please always use cutting oil when using the inch thread cutting tool. Properties of UNEF 1/4 x 32 Outer diameter: 6.35mm Diameter: core hole 5.7mm Slope: 0.79

Marking gauge analog This sturdy analogue marking gauge in stainless steel version is outfitted with a replaceable hard metal-mounted tear-off needle. The resolution of the dial gauge is 0.01mm. The largest dimension to measure is 310mm. Due to the adjustment wheel attached to the back, every dimension can be set very quickly and cleanly. The marking unit can be fixed by means of a locking screw. The analog dial gauge has a diameter of 55mm and is therefore very easy to read. The dial gauge is rotatable. A further great advantage with the analog variant of the marking gauge is that it does not need batteries. The 2 counters for full millimeters can be set to zero. If you want to draw a hole pattern with only the hole spacing, place the needle in the center of the workpiece, zero the counters, and move the needle to the desired height up and down. Digital marking gauge The stainless steel digital marking gauge has a replaceable hard metal pin. The division of the digital scale is 0.01mm. The largest dimension to measure is 310mm. The marking unit has a second carriage for fine adjustment. Both slides have a fixing screw for fixing. The digital unit can be changed from mm to inch. In addition, an absolute zero point and an incremental zero point can be set. The incremental zero point is required if you want to draw a hole pattern in which only the hole distances are dimensioned. The needle in the center of the workpiece will have incremental zeros, and now move the needle to the desired height up and down. After that, you will return to the absolute measure and you have again the distance between the drawing pin and the marking plate.    

The tap wrench is equipped with hardened clamping jaws and galvanized steel handles. When used in tight spaces, for example in model making, you can unscrew a steel handle. For particularly narrow applications, we recommend a tapping ratchet. You have 2 different tap wrenches to choose from in our shop. You can see which tap wrench fits in the table. Size     Clamping range    Total length Size 1       M1 - M8             130mm Size 2       M1 - M12            175mm

Abrasive linen economy roll in a practical dispenser box with viewing slot for fill level detection and high-quality tear-off knife. The abrasive cloth is made of a robust cotton fabric and is oil and petroleum resistant. The fabric is sprinkled with normal corundum and fully resin-bound. All grain sizes have a width of 25 mm and a length of 50 m. The abrasive cloth has a high grinding performance and a long service life. It is suitable for all common materials in the model making workshop: brass, stainless steel, steel, gray cast iron and aluminum. The tail tissue is of industrial quality and made  in Germany. The emery cloth is available in 3 different grain sizes. Technical properties of the emery cloth Abrasive corundum Saving rolls width 25 mm Economy rolls length 50 m Grain size 120(medium), 240(fine), 320(very fine)  

Präzise Nachschärfung mit der Diamantflachfeile Mit dieser hochwertigen Diamantflachfeile schleifen Sie mühelos HSS Stahl oder Hartmetallklingen nach. Herkömmliche Feilen sind für diesen Zweck ungeeignet – diese Diamantfeile ermöglicht eine einfache und präzise Nachbearbeitung. So bleibt Ihre Frässcheibe dauerhaft scharf und einsatzbereit. Die Diamantfeile hat eine Körnung von K600.Für folgende Anwendungen geeignet:- Hartmetall Drehstähle- HSS und Hartmetall Fräser- Scheren, Messer und andere Werkzeuge

Diamond step file 4mm, 4.8mm and 6.5mm Diamate file with 3 steps in diameters 4.0/4.8/6.5 mm for filing shaped steel made of HSS or carbide. The diamond round file is perfect for sharpening all common chainsaw chains. The diamond file is also suitable for sharpening the Kaindl Woodcarver, as well as for sharpening carbide teeth thanks to the diamond coatingn.Can also be used in a cordless screwdriver by removing the file handle. diamond round file 4.8mm This round diamond file has a continuous diameter of 4.8mm. With this file, the file tang is firmly connected to the handle. Of course, this diamond file also has the usual Kaindl quality. Because it has the same diameter throughout, it is more suitable for producing radius steels made of HSS.

The powder oven M 54 is our medium-sized baking oven for powder. The oven has rails into which a workpiece holder can be inserted. A workpiece holder is included. The oven stands on 4 sturdy PU wheels, two of the wheels are equipped with brakes so that the oven can be easily moved or fixed at any time. The oven is made of high-quality laser-cut galvanized steel sheets with a 30mm thick high density rock wool insulation (equivalent to normal 60mm thick insulation). The interior surfaces of the oven are covered with strong aluminum foil to shorten the heating time. The baking room has dimensions of 54x60x90cm. The external dimensions of the powder oven are 67cm high, 60cm wide and 90cm deep. the oven reaches 180°C in about 25 minutes and the maximum temperature (220°C) in about 35 minutes. It requires 230 V, single phase, 50 Hz, so can be used in any work area. The powder oven only consumes 1300W, so a standard 16 amp fuse is sufficient for operation. The oven is CE marked and comes with a 24 month warranty. The temperature can be controlled with an analog thermostat controller and 0 °C and 220 °C can be set. It has indicator lights, an indicator when the oven has reached a set temperature. External dimensions 67x75x96 cm (H x W x D) Internal dimensions 54x60x90 cm (H x W x D) Temperature range 0-220°C / 20°C to 180°C in 25min. (220°C in 35min.) Temperature control Analog thermostat controller Power voltage 230 V single phase (50 Hz) Power 2.8kW Materials Laser cut galvanized steel; 30mm insulation Weight 30kg Made in Lithuania (CE marked) Guarantee 24 months With us you will of course receive complete customer support, after the purchase, all spare parts if you need them. The oven is CE marked and comes with a 24 month warranty. The oven is manufactured in Lithuania and delivered directly from there by a shipping company. The oven stands directly on a pallet and is additionally secured with a frame. The oven can easily be lowered from the pallet with 2 people then stands on wheels and is mobile. Please note the delivery time is approx. 10 working days.      

This flexible sanding and deburring tool is made from a flexible, stable abrasive cloth. The Super-Star sanding star Ø 80 mm is perfect for sanding profiles and reliefs in wood as well as for deburring and derusting metal parts of all kinds. The Super-Star sanding star can be used with a hand drill/ cordless drill as well as with a stationary drill. Thanks to its softness compared to a wire brush, the sanding star can easily get into corners and beads. Despite its flexibility, this sanding tool is extremely durable. Outer diameter: 80mm - Total length: 100mmUsable width: 25-30mm, depending on grit sizeAvailable in grit sizes coarse (#80) medium (#120) - fine (#240)Max. Speed: 3,000 1/minShank: 6mm

With this milling disc you can process aluminum alloys, copper, zinc as well as wood and plastics with a one-handed angle grinder 115-125mm. The Multi-Plane was developed to process aluminum castings or to clean up aluminum weld seams. The area of application lies across all sectors in container, ship and vehicle construction as well as in the aluminum casting sector. But this disc is also an enrichment for the ambitious hobby craftsman. When it comes to wood, this disc even exceeds the performance of the Arbortech TURBOPlane. The milling disc has 5 interchangeable cutting elements and a diameter of 115 mm. Due to the special cutting geometry, chips and no dust are created when processing the material. This significantly reduces the burden on the workplace and prevents health and the risk of explosion. The Kaindl Multi-Plane is the safest, most effective and most economical solution for manual processing of aluminum. Unique advantages of Multi-Plane HD 5 cutting elements on 115mm Due to the width of 20mm, the cutting edges protrude sufficiently far from the original protection of the angle grinder. optimized cutting geometry, which enables controlled work despite high material removal. Cutting elements are replaceable and can be easily re-sharpened when disassembled CNC manufactured from one piece of high-strength aluminum Quality tool “Made in Germany” The economical alternative to abrasive roughing and flap discs Technical features: Dimensions: 115 x 20 x 22.2mm Nmax: 14,500 1/min Cutting material: HW (carbide, ground) Tightening torque: 4 Nm (T15 screw in M4 x 11mm) Use: hand-held milling tool “MAN”

Use this large support plate to extend the standard support plate of our BS1500 belt grinder. This allows you to easily carry out grinding work with a grinding device for knives, for example, or use other large grinding devices with the belt grinder. TThis large table is simply placed on the existing standard table of the belt grinder and attached with four welding points. Support surface: 470 mm x 220 mm

With these original carbide replacement blades for Kaindl Super Carver, you can provide your Super Carver with new, sharp carbide plates and thus maintain the performance of your milling disc. The high-quality materials ensure a long service life and precise cutting performance.  The carbide plates offer first-class cutting quality and enable precise and clean cuts in various types of wood. Extend the efficiency of your Super Carver with these reliable carbide interchangeable cutting edges from Kaindl.Scope of delivery:Carbide inserts, set of 3, round ø 10mm for Kaindl Super - Carver

With these original carbide replacement blades for Kaindl Wood-Plane, you can provide your Wood-Plane with new, sharp carbide plates and thus maintain the performance of your milling disc. The high-quality materials ensure a long service life and precise cutting performance.  The carbide tips offer first-class cutting quality and enable precise and clean cuts in various types of wood. Extend the efficiency of your wood tarpaulin with these reliable carbide interchangeable cutting edges from Kaindl.Scope of delivery:Set of 3, 24.5x11.7x3, 0mm

Entdecken Sie die KAINDL-Multishaft Werkzeugaufnahme für 115/125 mm Einhandwinkelschleifer – ein revolutionäres Werkzeug, das den Funktionsumfang Ihres herkömmlichen Winkelschleifers erweitert. Mit der Möglichkeit, sämtliche Werkzeuge eines handelsüblichen Geradschleifers zu verwenden, bietet der Multishaft grenzenlose Vielseitigkeit für eine Vielzahl von Anwendungen. Egal, ob Sie schleifen, bürsten, fräsen oder entgraten möchten. Mit einer Länge der Werkzeugaufnahme von 82 mm Länge und mit Spannzangen in den Größen 6, 8, 10 und 12 mm bietet er Ihnen die Flexibilität, die Sie benötigen, um Ihre Projekte präzise und effizient umzusetzen. Dank seiner direkten Montagemöglichkeit auf M14 Aufnahmegewinde passt der KAINDL-Multishaft zu sämtlichen Winkelschleifer Fabrikaten, egal ob netzbetrieben oder Akku. Profitieren Sie von professioneller Qualität, hergestellt in Deutschland von der Firma Kaindl Schleiftechnik, und erleben Sie höchste Leistungsfähigkeit und Langlebigkeit bei jedem Einsatz.Eigenschaften der Werkzeugaufnahme für Einhandwinkelschleifer 115/125 mm Erweitert den Funktionsumfang des Winkelschleifers Es passen sämtliche Werkzeuge eines handelsüblichen Geradschleifers Zum Schleifen, Bürsten, Fräsen, Entgraten uvm. Optimal für den Multi-Carver Fräsaufsatz von KaindlVerwendbar mit Spannzangen 6, 8, 10 und 12 mm Länge 82 mm der Werkzeugaufnahme Direkt montierbar auf M14 Aufnahmegewinde und somit passend für sämtliche Fabrikate Profi-Werkzeug in Profi-Qualität Made in GermanyLieferumfang:Kaindl Multi-Shaft Spannzangenaufnahme, Spannzangen je 1x in ø 6 / 8 / 10 mm

Entdecken Sie den Kaindl Multi-Carver Fräsaufsatz für präzises und effizientes manuelles Schnitzen und Fräsen von Holz. Dieses vielseitige Werkzeug ist kompatibel mit handelsüblichen Bohrmaschinen besonders effizient jedoch auf Winkelschleifern in Kombination mit dem KAINDL Multi-Shaft . Ausgestattet mit hochwertigen Hartmetallwendeplatten mit einem Durchmesser von ø 10mm bietet dieser Fräsaufsatz einen Schneidkreis von 25,4mm und einen Grundkörper von 25,0mm. Der Schneidradius beträgt großzügige 5mm, was Ihnen präzise und saubere Schnitte ermöglicht.  Der Aufnahmeschaft von 10mm Durchmesser sorgt für eine sichere Verbindung mit Ihren Werkzeugen, während die Einspannlänge von mindestens 20mm bis maximal 25mm Flexibilität bei der Anpassung an verschiedene Anforderungen bietet. Im Lieferumfang enthalten sind der Kaindl Multi-Carver Fräsaufsatz mit 2 runden 10mm Hartmetallwendeplatten sowie ein Schraubendreher (T15) für eine einfache Installation und Handhabung. Technische Daten Für Winkelschleifer (nur in Verbindung mit KAINDL Multi-Shaft) auch verwendbar auf Bohrmaschine Hartmetallwendeplatte: rund ø 10mm Durchmesser: Schneidkreis 25,4mm Grundkörper: 25,0mm Schneidradius: 5mm Aufnahmeschaft: 10mm Einspannlänge: mind. 20mm – max. 25mm Lieferumfang: Kaindl Multi-Carver Fräsaufsatz mit 2 runden 10mm Hartmetallwendeplatten, Schraubendreher (T15)

Very stable component holder made of 2 mm thick, galvanized steel for use with the XL oven. With this stand, workpieces such as rims, motorcycle frames, but also many small parts can be hung up and coated with powder. After spraying on the powder, this component holder can be rolled in front of the oven and the workpiece holders with the workpieces can be pushed into an oven. The frame/stand is delivered unassembled in a box and requires around 60 minutes to assemble the screws and nuts.Technical data component holder on wheels for XL ovenExternal dimensions 177x101x60 cm (H x W x D)

With these original carbide replacement blades for Kaindl Multi-Plane, you can provide your Wood-Plane with new, sharp carbide plates and thus maintain the performance of your milling disc. The high-quality materials ensure a long service life and precise cutting performance.  The carbide tips offer first-class cutting quality and enable precise and clean cuts in various types of wood. Extend the efficiency of your wood tarpaulin with these reliable carbide interchangeable cutting edges from Kaindl.Scope of delivery:Set of 5, 24.5x11.7x3, 0mm

The Alu-Carver was developed specifically for processing aluminum by Kaindl Schleiftechnik. When machining aluminum, dust is no longer produced during machining as is the case with conventional grinding, but instead chips are produced as the material is milled. This reduces the risk of health problems and explosion hazards during the machining process to an absolute minimum. It is the safest, most effective and most economical solution for freehand machining of aluminum.  Area of application: Suitable for processing aluminum alloys with one-hand angle grinders measuring 115-125 mm. Areas of application can be found in various industries such as container, ship and vehicle construction as well as in aluminum casting. Typical applications include chamfering and trimming welds, milling root welds and rough machining of castings.  Machinable materials: Aluminum alloys, copper, zinc as well as wood and plastics, including fiber-reinforced composites. Product features of the Kaindl  The economical alternative to abrasive roughing and flap discs < li>No production of harmful and explosive dusts Can be used on angle grinders Ø115 and Ø125 Loading hole 22.2mm Very high material removal rate with safe controllability at the same time No adhesions (built-up edge) thanks to polished chip guide surfaces The HW cutting elements are extremely durable and rotatable and replaceable CNC manufactured from one piece of high-strength aluminumQuality tool “Made in Germany” Technical features of the aluminum milling disc: Dimensions: 115 x 10 x 22.2mm Nmax: 14,500 1/min Cutting material: HW (carbide, ground with polished cutting surface)Use: hand-held milling tool “MAN”

Mit diesem hochwertigen Spanndorn von Kaindl befestigen Sie Schleif- und Trennscheiben mit 115 mm oder 125 mm sicher und zentriert – z. B. zur Nutzung an einer Bohrmaschine oder in einem Bohrständer. Die Aufnahme von Ø 10 mm passt in gängige Bohrfutter, die Scheibenaufnahme entspricht Ø 22,2 mm. Dieser Dorn passt zu allen Kaindl Sichtschleifscheiben. Lieferumfang Befestigungsdorn (Ø 10 mm auf Ø 22,2 mm) Spannscheibe Senkkopfschraube M6 × 16 Ideal für Werkstatt, Handwerk und Hobby – für flexibles Arbeiten mit gängigen Schleif- und Trennscheibenund für die Kaindl Sicht Schleifscheiben.