Cutting Disks and Spikes for Segway Navimow

This Cutting Disk is compatible with the following WORX Landroid, Landroid Vision and Landroid Vision Cloud models with a cutting width of 22 cm (8.66 inches). With our Cutting Disk for Worx Landroid models with a cutting width of 22 cm (8.66 inches), you achieve a visibly cleaner and more precise cutting result thanks to the 7 mounted C-blades. The precise cuts promote a dense, well-maintained lawn. Especially practical: Our Heavy-Duty Cutting Disk is designed for inexpensive, extremely sharp, and long-lasting ceramic hob scraper blades. IMPROVED CUTTING PERFORMANCE – The 7 mounted blades provide a significantly cleaner and more even cut. The replacement blades are inexpensive, extremely sharp, and highly durable. EXCEPTIONALLY QUIET – The almost completely smooth underside reduces air turbulence, allowing your robotic mower to operate much more quietly. HIGHER CUTTING PERFORMANCE – Even dense or taller grass is handled effortlessly. The increased number of blades delivers outstanding cutting performance and a consistently clean finish. FEWER BLADE CHANGES – Thanks to the higher number of blades, wear is distributed across more cutting edges. This significantly extends blade life and reduces replacement frequency. HEAVY-DUTY DESIGN – No plastic parts and no 3D-printed components. The Cutting Disk is made entirely from high-quality stainless steel and aluminum. The smooth underside also helps reduce operating noise. With our SuperCut2 Cutting Disk, you not only increase the efficiency of your Worx Landroid but also reduce maintenance requirements. Thanks to its robust materials, the disk offers outstanding durability and reliability. Matching replacement blades for our SuperCut Cutting Disk are also available from us. Cutting Width: 22 cm (8.66 inches) Package Contents – Stainless Steel Cutting Disk Assembled Cutting Disk (glide plate, blade plate, mounting flange) 10 C-blades for ceramic hob scrapers (0.6 mm thick, stainless steel) 10 stainless steel screws for blade mounting 3 stainless steel screws for mounting the Cutting Disk Compatible with the Following Worx Landroid Models Worx Landroid L1000 (WR147E) Worx Landroid L1500 (WR153E) Worx Landroid L2000 (WR155E) Worx Landroid Vision L1300 (WR213E) Worx Landroid Vision L1600 (WR216E) Worx Landroid Vision L2000 (WR208E) Worx Landroid Vision Cloud L1200 (WR312E) Worx Landroid Vision Cloud (WR330E) Worx Landroid Vision Cloud 4WD (WR341E) – 1000 m² Worx Landroid Vision Cloud 4WD (WR342E) – 2000 m² Worx Landroid Vision Cloud 4WD (WR344E) – 4000 m² This Cutting Disk is compatible with the above-mentioned Worx Landroid and Worx Landroid Vision Cloud models with a cutting width of 22 cm (8.66 inches).

Achieve a visibly better cutting result with our cutting disk for Worx Landroid L. Equipped with seven C-blades, it ensures precise cuts for an even and well-maintained lawn. A key advantage is the cost-effective replacement blades: Our Heavy Duty cutting disk is specifically designed for affordable, extremely sharp, and durable replacement blades used in ceramic hob scrapers. Benefits of the Cutting Disk for Worx Landroid L Superior Cutting Quality: With seven high-performance blades, our cutting disk delivers a noticeably better cutting result. Affordable Replacement Blades: The Heavy Duty cutting disk is exclusively compatible with ceramic hob scraper blades, which are more cost-effective, extremely sharp, and highly durable. Quieter Operation: The nearly smooth underside reduces air turbulence, making your mower significantly quieter. Higher Cutting Efficiency: The enhanced design allows your Worx Landroid to cut through tall and dense grass with ease. Less Frequent Blade Changes: The double number of blades extends their lifespan, reducing the need for frequent replacements. Heavy Duty Design: Made entirely from stainless steel and aluminum—no 3D-printed parts, no plastic. The smooth underside minimizes air turbulence, ensuring quiet operation that won't disturb you or your neighbors. Our cutting disk enhances your Worx Landroid’s efficiency by enabling it to handle tall and dense grass effortlessly. This significantly improves the device’s overall performance. Another key benefit is the reduced need for blade replacements. With double the number of blades, they last much longer, saving you both time and money. Our HEAVY DUTY cutting disk is made exclusively from premium stainless steel and aluminum, ensuring durability and long-lasting reliability—no 3D-printed parts, no plastic. Find the suitable replacement blades for the SuperCut cutting disk. Cutting width: 200 mm Scope of Delivery – Stainless Steel Cutting Disk Pre-assembled cutting disk (glide plate, blade plate, mounting flange) 10 stainless steel C-blades (0.6 mm thick, rust-resistant) 10 stainless steel screws for blade mounting 3 stainless steel screws for securing the cutting disk

Achieve a visibly better cutting result with our cutting disk for Worx Landroid S and M. Equipped with  7 C-blades, it ensures precise cuts for an even and well-maintained lawn. A key advantage is the cost-effective replacement blades: Our Heavy Duty cutting disk is specifically designed for affordable, extremely sharp, and durable replacement blades used in ceramic hob scrapers. Benefits of the Cutting Disk for Worx Landroid Improved Cutting Performance: Thanks to 7 high-performance blades, our cutting disk delivers a noticeably superior cutting result. Affordable Replacement Blades: The Heavy Duty cutting disk is exclusively compatible with ceramic hob scraper blades, which are more cost-effective, extremely sharp, and highly durable. Quieter Operation: The nearly smooth underside reduces air turbulence, making your mower significantly quieter. Higher Cutting Efficiency: The enhanced design allows your Worx Landroid to cut through tall and dense grass with ease. Less Frequent Blade Changes: The double number of blades extends their lifespan, reducing the need for frequent replacements. Heavy Duty Design: Made entirely from stainless steel and aluminum—no 3D-printed parts, no plastic. The smooth underside minimizes air turbulence, ensuring quiet operation that won't disturb you or your neighbors. Our cutting disk enhances your Worx Landroid’s efficiency by enabling it to handle tall and dense grass effortlessly. This significantly improves the device’s overall performance. Another key benefit is the reduced need for blade replacements. With double the number of blades, they last much longer, saving you both time and money. Our HEAVY DUTY cutting disk is made exclusively from premium stainless steel and aluminum, ensuring durability and long-lasting reliability—no 3D-printed parts, no plastic. Find the suitable replacement blades for the SuperCut cutting disk. Cutting width: 18 cm Scope of Delivery – Stainless Steel Cutting Disk Pre-assembled cutting disk (glide plate, blade plate, mounting flange) 10 stainless steel C-blades (0.6 mm thick, rust-resistant) 10 stainless steel screws for blade mounting 3 stainless steel screws for securing the cutting disk

Compatible with the following robotic lawn mower models: Worx Landroid Vision S250 (WR202E), M550 (WR205E), and M600 (WR206E). Heavy-Duty Cutting Disk for Worx Landroid Vision With our cutting disk for the Worx Landroid Vision, you’ll achieve noticeably improved mowing results thanks to the six mounted C-blades. These precision blades ensure a clean and even lawn. A key advantage: our heavy-duty cutting disk is specifically designed for cost-effective, ultra-sharp, and long-lasting replacement blades originally made for ceramic hob scrapers. Advantages at a Glance Improved Cutting Quality – The 7 mounted blades deliver a visibly cleaner and more consistent cut. The replacement blades are affordable, extremely sharp, and long-lasting. Especially Quiet – The nearly smooth underside reduces air turbulence, allowing your robotic mower to operate much more quietly. Higher Cutting Performance – Even tall or dense grass is no problem. The cutting disk helps your Worx Landroid Vision cut through difficult areas with ease. Less Frequent Blade Changes – With double the number of blades, they last longer and require fewer replacements. Heavy-Duty Quality – No 3D-printed parts, no plastic: made entirely from high-grade stainless steel and aluminum. The smooth underside further reduces noise during operation. Our cutting disk not only increases the efficiency of your Worx Landroid mower, but also reduces maintenance. Thanks to its durable materials, the disk delivers long-lasting performance and reliability. You’ll also find matching replacement blades for our SuperCut disk in our store. Cutting width: 18 cm Scope of Delivery – Stainless Steel Cutting Disk Pre-assembled cutting disk (glide plate, blade plate, mounting flange) 10 stainless C-blades (0.6 mm thick, rust-resistant) 10 stainless screws for blade mounting 3 stainless screws for cutting disk attachment

This SuperCut Cut-to-Zero Cutting Disk has been specially developed for the Worx Cut-to-Zero Modules WA0925, WA0926 and WA0928 and is compatible with all Worx Landroid Vision Cloud models using these modules. Featuring 2 fixed C-blades, the SuperCut provides a significantly cleaner and more even cutting result than the original cutting disk. The precise cuts promote a dense, healthy-looking lawn and noticeably improve the appearance of your turf. Particularly economical: The SuperCut uses inexpensive, extremely sharp, and long-lasting ceramic hob scraper blades that are available worldwide and can be replaced quickly whenever needed. Your Benefits at a Glance Improved Cutting Performance: The 2 fixed blades provide a clean and precise cut. High Cutting Efficiency: Reliably cuts even dense or taller grass. Exceptionally Quiet Operation: The nearly completely smooth underside reduces air turbulence. Fewer Blade Changes: Wear is distributed across multiple cutting edges, extending blade life. Heavy-Duty Construction: No plastic parts and no 3D-printed components. Low-Cost Replacement Blades: Uses proven ceramic hob scraper blades. Robust, Durable, and Low Maintenance The SuperCut Cut-to-Zero Cutting Disk combines maximum stability with outstanding cutting performance. Thanks to its robust stainless steel and aluminum construction, you benefit from a durable solution for your Worx Landroid Vision Cloud. At the same time, maintenance requirements and operating costs are reduced due to the long service life of the blades. Suitable for all Worx Cut-to-Zero Modules and all compatible Worx Landroid Vision Cloud models with a cutting width of 10.8 cm (4.25 inches). Matching replacement blades for our SuperCut Cutting Disk are also available from us. Cutting Width: 10.8 cm (4.25 inches) Package Contents – Stainless Steel Cutting Disk Assembled cutting disk (glide plate, blade plate, mounting flange) 4 C-blades for ceramic hob scrapers (0.6 mm thick, stainless steel) 4 screws for blade mounting (stainless steel) 2 screws for mounting the cutting disk (stainless steel)

Spikes für Worx Landroid Mähroboter S & M aus Edelstahl. Optimieren Sie die Leistung Ihres Landroid Mähroboters mit unseren hochwertigen Edelstahl-Spikes. Diese Spikes sorgen für eine deutlich bessere Traktion, verhindern das Festfahren und das Eingraben der Antriebsräder, was besonders auf schwierigen Rasenflächen von Vorteil ist. Schützen Sie Ihren Rasen und verbessern Sie die Leistung Das Durchdrehen der Standardräder kann dazu führen, dass im Randbereich des Rasens kahle Stellen entstehen. Da der Mähroboter immer wieder an denselben Stellen festfährt, erholen sich diese Bereiche nur sehr langsam. Mit den Spikes erhalten Sie jedoch mehr Grip und verhindern das Festfahren. Ihr Mähroboter wird effizienter und Ihr Rasen bleibt in besserer Form. Weniger Fehler und Ausfälle Unsere Spikes reduzieren Fehler und Ausfälle beim Betrieb des Rasenroboters und sorgen für einen gesünderen und schöneren Rasen. Selbst bei schwierigen Bedingungen, wie hohem oder nassem Gras, sorgt die verbesserte Traktion für einen reibungslosen Betrieb und weniger Stress für Sie. Die Vorteile auf einen Blick Hohe Traktion: Verhindert das Festfahren und schützt Ihren Rasen. Weniger Fehler: Spikes sorgen für weniger Ausfälle und effizientere Arbeit. Edelstahl: Langlebig, rostfrei und robust. Weniger Stress: Reduziert die Häufigkeit von Störungen und sorgt für einen schöneren Rasen. Optimieren Sie die Leistung Ihres Landroid Mähroboters mit diesen Edelstahl-Spikes – für einen besseren Rasen und weniger Ärger beim Mähen!

SuperCut Replacement Blades – Compatible with SuperCut 1 & SuperCut 2 These SuperCut ceramic scraper replacement blades are the perfect choice for all of our cutting disks – including SuperCut 1 and SuperCut 2. Ideal for replacement, stocking up or regular maintenance. 0.5 mm Thick – Extra Strong & Durable With a material thickness of 0.5 mm, these blades are especially strong and robust. This ensures a long service life – the blades stay sharp for a long time and need to be replaced less frequently. Key Benefits at a Glance Compatible with SuperCut 1 & 2: fits all of our SuperCut cutting disks 0.5 mm thickness: extra strong and durable design Long service life: stays sharp for a long time, fewer replacements needed Clean cutting results: reliable performance in daily use Set of 10 blades: practical supply for quick maintenance Scope of delivery: 10x SuperCut replacement blades (ceramic scraper blades)

The screws are suitable for securing the ceramic cooktop scraper blades and fit all our SuperCut cutting disks for all robotic mowers. Made from rust-free steel, they offer excellent quality and durability. You will receive a pack of ten mounting screws. Package Contents: - 10 mounting screws M5x5

The screws are suitable for securing the ceramic cooktop scraper blades and fit all our SuperCut cutting disks for all robotic mowers. Made from rust-free steel, they offer excellent quality and durability. You will receive a pack of ten mounting screws. Package Contents: - 10 mounting screws M3x4