Abrasive Nylon Cup Brush 130mm

This Abrasive Nylon Cup Brush 130mm is perfect for deburring, smoothing, edging and fine sanding of small to large parts. The Cup Brush consists of a blue plate in which nylon threads are passed through the silicon carbide. The brush has an M14 connection thread and therefore fits all common angle grinders. Optionally, you can also order an M14 -10mm adapter with which you can clamp the Cup Brush into your stand boring machine. You will find the adapter at the top of the selection selection. Into the stator boring machine, you have a fantastic deburring tool with an extremely long service life. The nylon threads always have an even grinding effect since new abrasives are constantly released by the wear of the nylon thread. With the Osborn Cup Brush you can process steel, stainless steel, brass, copper, bronze and also aluminum. Dimensions of Abrasive Nylon Cup Brush 130mm:   Diameter of grinding plate: 130 mm  Grain size: K120  Connection thread: M14 (shaft angle grinder)  Bristle length: 30 mm   Technical characteristics of the Abrasive Nylon Cup Brush 130mm   Nylon filaments interspersed with silicon carbide   Uniform grinding effect (new abrasive material is constantly released by wear)   High elasticity and flexibility without risk of breakage   No clogging of the resting surface with working residues   Resistant to weak acids and alkalis   Very long service Made in Germany   life with optimal conditions  Application areas of the Abrasive Nylon Cup Brush 130mm   Lacquering and structuring of wood   Suitable for steel, stainless steel, brass, copper, bronze and aluminum   Rusting or descaling of metal surfaces   For deburring, smoothing, and fine grinding from small to large components   Break and crimp edges   Aluminum profiles   Deburring with the Osborn dish brush 130mm

Soft soldering paste for brass, copper, steel and silver steel. The paste is applied thinly to the parts to be tinned and heated with a brazing lamp. For large-area soft soldering, it is optimal to tin- the parts beforehand. For example, we use the paste to pre-tine the cylinder and the mirror when constructing a model steam engine. The tinning paste can also be used optimally as a flux substitute. The soft soldering paste is excellently suitable as corrosion protection for steel parts. Bengs Modellbau uses the zinc paste for steel cylinders with a cooling water jacket. For example in the Flammenfresser Kurfürst. Stirring the paste before use is not necessary! The soft soldering paste may be diluted with water. Ready-to-use metal paste Contents: 50g Bottle with brush Click here for the modeling magazine: Soldering with soft solder paste and tin paste Soldering and tinning with soft soldering and tinning paste

These satin wheel are available in fine, medium and coarse grain sizes. You can use these satin wheel to clean the surface or the material you have started. Optimum cleaning of the satin wheel also brazed components but also to remove a rust or oxide layer on small components in model building, the satin brushes are suitable. The grinding wheel are fixed on the mandrel. The wheels can easily be clamped into the chuck of a fast grinder, for example Dremel or Proxxon. We use the satin wheels to clean parts soldered with silver solder. Characteristics of Satin wheel: Diameter Satining wheel: 22mm Shank: 2.35 mm Manufacturer: Scotch

These satin wheel are available in fine, medium and coarse grain sizes. You can use these satin wheel to clean the surface or the material you have started. Optimum cleaning of the satin wheel also brazed components but also to remove a rust or oxide layer on small components in model building, the satin brushes are suitable. The grinding wheel are fixed on the mandrel. The wheels can easily be clamped into the chuck of a fast grinder, for example Dremel or Proxxon. We use the satin wheels to clean parts soldered with silver solder. Characteristics of Satin wheel: Diameter Satining wheel: 22mm Shank: 2.35 mm Manufacturer: Scotch