Rohrschelle einfach und doppelt

Rohrschellen aus Messing für den Modellbau

Pipe clamp single and double

Pipe clamp CNC milled from brass. These pipe clamps are used to fix brass pipes or copper pipes on their model building facility. The pipe clamps have a 2.2 mm holes and can either use wood screws or with m2 model rob to be attached. We have the clamps in both a single version for attaching one pipe and a double version for attaching 2 pipes. The pipe clamps are milled out of brass material with a CNC milling machine and then receive a second one from us .2 mm hole for fastening. Dimensions of the pipe clamp for 3mm pipe Single Length: 9.5mm Height: 3.7mm Width: 4mm For clamping: 1x 3mm pipe Double Length: 11.5mm Height: 3.7mm Width: 4mm For clamping: 2x 4mm pipe Dimensions of the pipe clamp for 4mm pipe Single Length: 10.5mm Height: 4.5mm Width: 4mm For clamping: 1x 4mm pipe Double Length: 13mm Height: 4.5mm Width: 4mm For clamping: 2x 4mm pipe

Variants from €1.80*

€2.20*

Pipe clamp single and double

Pipe clamp CNC milled from brass. These pipe clamps are used to fix brass pipes or copper pipes on their model building facility. The pipe clamps have a 2.2 mm holes and can either use wood screws or with m2 model rob to be attached. We have the clamps in both a single version for attaching one pipe and a double version for attaching 2 pipes. The pipe clamps are milled out of brass material with a CNC milling machine and then receive a second one from us .2 mm hole for fastening. Dimensions of the pipe clamp for 3mm pipe Single Length: 9.5mm Height: 3.7mm Width: 4mm For clamping: 1x 3mm pipe Double Length: 11.5mm Height: 3.7mm Width: 4mm For clamping: 2x 4mm pipe Dimensions of the pipe clamp for 4mm pipe Single Length: 10.5mm Height: 4.5mm Width: 4mm For clamping: 1x 4mm pipe Double Length: 13mm Height: 4.5mm Width: 4mm For clamping: 2x 4mm pipe

Variants from €1.80*

€1.90*

Pipe clamp single and double

Pipe clamp CNC milled from brass. These pipe clamps are used to fix brass pipes or copper pipes on their model building facility. The pipe clamps have a 2.2 mm holes and can either use wood screws or with m2 model rob to be attached. We have the clamps in both a single version for attaching one pipe and a double version for attaching 2 pipes. The pipe clamps are milled out of brass material with a CNC milling machine and then receive a second one from us .2 mm hole for fastening. Dimensions of the pipe clamp for 3mm pipe Single Length: 9.5mm Height: 3.7mm Width: 4mm For clamping: 1x 3mm pipe Double Length: 11.5mm Height: 3.7mm Width: 4mm For clamping: 2x 4mm pipe Dimensions of the pipe clamp for 4mm pipe Single Length: 10.5mm Height: 4.5mm Width: 4mm For clamping: 1x 4mm pipe Double Length: 13mm Height: 4.5mm Width: 4mm For clamping: 2x 4mm pipe

Variants from €1.80*

€2.20*

Copper tube soft

The soft copper tube is suitable for all applications in steam model making and for technical model making. The Cu pipe is also suitable for gasoline lines or diesel lines for motorcycles, tractors and vintage cars. The copper tube is very malleable and can be easily bent into narrow radii by hand. Our soft copper pipes are delivered in a ring and are 1000mm long. If you need a 3m long copper pipe in one piece, simply order 3m copper pipe in the desired diameter. In order to keep your waste as low as possible, we always deliver the pipes in one piece in the length you ordered. Matching compression fittings can also be found in our shop. If you order several meters of a CU pipe diameter, we will always send you the copper pipe in one piece. The following CU tubes and copper tubes in a ring are available: 3mm x 0.5mm soft copper tube 4mm x 0.5mm soft copper tube 5mm x 0.5mm soft copper tube 6mm x 0.5mm soft copper tube 6mm x 1.0mm soft copper tube 8mm x 1.0mm soft copper tube 10mm x 1.0mm soft copper tube

€8.80*

Pipe clamp single and double

Dimensions of the pipe clamp for 3mm pipe

Dimensions of the pipe clamp for 4mm pipe

Login