Flanges for steam model construction for soldering in steam and water pipes. All sizes have 4 x 2.2mm holes for screwing with M2 screws (SW 4mm or SW 3mm). The flanges can be pushed onto a steam or water line and can be brazed or soldered. These flanges make their model building engine look true to the original. The enclosed Abil paper seal ensures the required tightness.
Included in the delivery are:
10 flanges
8 Seals
Flansch A
Flansch B
Durchmesser
16mm
18mm
Höhe
5mm
6mm
Zum Einlöten von
4mm Rohr
6mm Rohr
Teilkreis
11mm
13mm
On request, we can supply you with the appropriate screws and nuts M2x6 Modellbauschrauben (SW 3) Modellbaumutter M2.The screws and nuts are not included in the scope of delivery.
Here you will find model construction screws in various diameters and lengths made of brass. A model bucket with a hex head has a smaller key width and a higher head compared to standard hex head screws. With model screws, you can give your steam engine, Stirling engine or Flammenfresser an authentic appearance. Since the screws used at the time of steam engines or station heaters were similar in proportions. In addition, the smaller heads consume less space on your model machine and they can be placed closer. We recommend that you use our Micro plug to mount the model screws. One packaging unit includes 25 model hexagon bolts.
The following model screws are available at any time.
Model building screw brass SW. 3mm M2x5mm / head height 2 mm
Model building screw brass SW. 3mm M2x6mm / head height 2 mm
Model building screw brass SW. 3mm M2x10mm / head height 2 mm
Model building screw brass SW. 4mm M3x8mm / head height 1.7 mm
Model building screw brass SW. 4mm M3x15mm / head height 2,5 mm
Price per 25 pieces in EUR.
The hard copper tube Sf-Cu is suitable for all applications in steam model construction and for technical model construction. In contrast to the soft copper tube, this copper tube is delivered straight in the bar. If you want to install a straight line, we recommend using this copper pipe. It is suitable for steam lines, fuel lines and cooling water pipes. If the copper tube should be bent once you can burn it with the burner before, afterwards it can bend excellent. The copper tube hard can be easily soldered and brazed. For brazing, we recommend our AG-55 silver braze bars.
Matching flanges and fittings for model building you here.
The CU pipe is supplied as a straight piece
1 Packing unit consists of 3x 330mm long bars. Total length 1000mm
The following copper tubes are available:
2mm x 0.3mm round tube
3mm x 0.5mm round tube
4mm x 0.5mm round tube
5mm x 0.5mm round tube
6mm x 0.5mm round tube
8mm x 1mm round tube
If you need brass pipes, click here (brass pipe Ms63)
These copper fittings are for soldering steam lines and water pipes and can be brazed with silver solder as well as soft soldered with soft solder. If you want to make steam pipes as straight as possible with the fittings, we recommend the copper pipes which are available from us. In addition, the fitting 90 ° are still suitable for exhaust, cooling lines and other constructions in model construction. The 90 ° bends are formed in one piece from copper tube. The copper fittings are available in different sizes. In the fittings, both the copper tube we supply and the copper tubes can be brazed. You will also find in our shop couplings and tees for pipeline construction in model construction.
The fitting 90 ° bends from 4mm to 6mm have a wall thickness of 0,5mm. The copper arches from 6mm to 12mm have a wall thickness of 1mm
Fitting 4mm
Fitting 5mm
Fitting 6mm light
Fitting 6mm schwer
Fitting 8mm
Fitting 10mm
Fitting 12mm
Radius Neutrale Faser
5mm
7mm
9mm
9mm
10mm
13mm
15mm
Schenkellänge
13mm
16mm
19mm
19mm
24mm
26mm
32mm
Zum Einlöten von
4mm Rohr
5mm Rohr
6mm Rohr
6mm Rohr
8mm Rohr
10mm Rohr
12mm Rohr
Wandstärke
0,5mm
0,5mm
0,5mm
1,0mm
1,0mm
1,0mm
1,0mm
Variants from €1.00*
€2.90*
This website uses cookies to ensure the best experience possible. More information...