Cylinder tube

Bengs Modellbau

Zylinderrohr als Zylinderhülse in Modellbaumotoren mit hoher Verschleißfestigkeit

€14.10*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Diameter material

25mm

30mm

40mm

50mm

Product number: 5300

Product information "Cylinder tube"

This tube is a hydraulic cylinder tube. The inside of the tube is very dimensionally stable and wear-resistant. The cylinder tube is suitable as a cylinder sleeve for an internal combustion engine or flame eater. We also use this cylinder tube in our models. We use it for the combustion engine Karl , Stirling engine "Big Laura" and the Flame Eater Jarne. Due to its high wear resistance, the tube has proven itself as a cylinder sleeve for us.

Dimensions of hydraulic cylinder tube 25mm:

Outer diameter: 35mm
Inner diameter: 25mm
Length: 83mm
Material: St52

Suitable Piston ringsfor this cylinder tube can be found here

Dimensions of hydraulic cylinder tube 30mm:

Outer diameter: 40mm
Inner diameter: 30mm
Length: 86mm
Material: St52

Dimensions of hydraulic cylinder tube 40mm:

Outer diameter: 50mm
Inner diameter: 40mm
Length: 117mm
Material: St52

Dimensions of hydraulic cylinder tube 50mm:

Outer diameter: 60mm
Inner diameter: 50mm
Length: 142mm
Material: St52

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Piston rings

Piston rings for installation in an internal combustion engine. These piston rings are industrially manufactured and fit exactly into the cylinder tubes we offer. The rings are made from GG 25. Because they have a larger diameter when dismantled, they always rest against the cylinder wall when assembled due to the spring force, thus ensuring good compression. These piston rings fit perfectly into our cylinder barrel. Dimensions of the piston rings 25mm Nominal diameter: 25 mm Height: 1.5 mm Thickness 1.05 mm Material: GG25 Dimensions of the piston rings 30mm Nominal diameter: 30 mm Height: 1.5 mm Thickness 1.5 mm Material: GG25 Dimensions of the piston rings 40mm Nominal diameter: 40 mm Height: 2.0 mm Thickness 1.7 mm Material: GG25

Variants from €7.50*

€9.40*

Geschälte Grauguss Rundstange für Kolben im Modellbau

Cast iron round material

Cast iron with lamellar graphite. The surface is peeled on the gray cast iron bars. The round bars are a little over-sized. You can also make a 30mm piston with a 30mm diameter. The material is suitable both for the production of pistons or cylindrical sleeves for model-built motors as well as for the production of plain bearing bushes. We use this material for the pistons at the station "Karl". The round material can be perfectly machined on the lathe and on the milling machine and has excellent running characteristics. All round bars are 300mm long.

Variants from €21.00*

€21.60*

Kugellager für verschiedene Anwendungen im Modellbau

Ball bearings for model construction

You will find in our shop ball bearings made of steel in different sizes. All ball bearings are offered in the ZZ variant. The double-sided sheet metal disc with gap seal keeps dirt out and guarantees a good smooth running. The ball bearings are very well suited for technical modeling. We use the miniature ball bearings for flame eaters, steam engines and Stirling engines as they are particularly easy to move. Most of the offered ball bearings have a small cross-section to keep the installation dimension as low as possible. The following ball bearings are available: Inner diameter outer diameter width ball bearings 63 ZZ 3mm 6mm 2,5mm ball bearings 106 ZZ 6mm 10mm 3mm ball bearings 688 ZZ 8mm 16mm 5mm ball bearings 6700 ZZ 10mm 15mm 4mm ball bearings 61800 ZZ 10mm 19mm 5mm

Variants from €1.80*

€1.90*

Kleine Zündkerze mit M10x1 Gewinde für den Verbrennungsmodellbau

spark plugs CM-6 M10x1

These relatively small spark plugs are particularly suitable for model combustion engines. Its metric M10 × 1 thread also fits into smaller cylinder heads. The spark plugs fit into our internal combustion engine and can be used as a spare part. Of course, you can also use the spark plug CM-6 for your own development with our ignition components. Data of spark plug CM-6 M10x1 Key range: 14.0 mm Overall length: 36mm External thread: M10x1 Thread length: 8.6 mm

€9.50*