Brass Ms58 flat material

€3.60*

Available, delivery time: 1-3 days

Product number: 52126

Product information "Brass Ms58 flat material"

Brass Ms58 flat material is a very good machinable material. Brass is probably the most widely used material in technical modeling. Which is certainly due to the fact that it can be worked very well. It can be milled, turned, drilled, brazed and softened. Many Stirling engines, steam engines and flame eaters in technical model construction are mainly made of MS58 brass. You can order brass flat material in different thicknesses from 2mm to 6mm here at the Bengs Modellbau Shop.

Flat Material Brass Quality: Ms 58 (drilling and turning quality)
Strength F45-50
Flat material 50mm wide
Length 300mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Schmirgelfeilen in verschiedenen Durchmessern

Sanding paper file

The flat emery file with a wooden handle is available in different grit sizes. The cleanly cut wooden strips are covered with sandpaper. The files are ideal for working on wood or metal. We also like to use the emery files in our workshop. Dimensions of the emery files: Length: 250 mm Working length: 210 mm Width: 20 mm Height: 6 mm Grain: K100, K220, K320, K600

Variants from €1.70*

€1.80*

Sehr dünner Silberlotdraht zum Löten kleinster Lötstellen im Modellbau

Silver solder wire

The silver solder wire is suitable for particularly fine soldering points in model making, crafts, industry or jewelery trade. Silver solder wire is only 0.5mm thick and can be very finely dosed. We supply you the silver braided wire as a 5 meter long piece and you can cut the silver solder wire as desired. You can also use this silver solder wire to form rings, for example, which can be used to solder a wave around the shaft during soldering and then only have to heat it with flux. By this process the silver solder is equal in the required place. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. Brazing flux is essential for brazing brass and steel. Tip: Flux remedies and discoloration of the material can be optimally eliminated with our Satinbrushes! The silver solder wire 0.5 mm is suitable for brazing brass, copper, heavy metals, steels and stainless steel. All materials can be joined together. 1 Packing unit includes 5m 0.5mm silver solder wire Silver solder wire L-Ag55 (55% silver) !!! Cadmium free !!!

€14.90*

Lötziegel als Lötunterlage bei Lötarbeiten im Modellbau

soldering brick

The white soldering brick is ideal as a soldering base for brazing and soldering in model building. The solder seal can be cut as required. In addition, soldering and holding needles can be inserted very easily into the brick in order to fix the component to be soldered. The white tiles have a relatively smooth and plane surface, through which sharp edges several bricks can be assembled seamlessly. To fix components that are to be soldered, you can simply nail into the porous material of the soldering iron. Thus, a soldering device can be produced very quickly. The soldering bricks are also suitable for the construction of a melting point. By assembling several soldering bricks, one can produce an excellent soldering place in which the gas flame of the burner can be optimally utilized. Dimensions of the brazier: 220mm x 110mm x 30mm

€8.30*

Sanding paper file

Variants from €1.70*

€1.80*