Antique band saw ready-to-run model made of plastic
€68.00
Available, delivery time: 1-3 days
Product information "Antique band saw ready-to-run model made of plastic"
The drive model of a band saw offered here is an attractive addition to any diorama machine hall and at the same time an appealing functional model for operation with a steam engine, vacuum engine (flame eater), Stirling engine or internal combustion engine.
The band saw is made from a very cleanly manufactured 3D print, with the plastic frame reinforced inside by a stainless steel core. This gives the model a pleasant weight and a high-quality feel. The work table made of 2.5 mm thick stainless steel underlines the solid, high-quality impression.
All wheels run on ball bearings and ensure smooth and even operation. A drive spiral is used as the saw band; therefore, cutting operations as well as injuries are not possible.
The overall appearance is completed by two elegant brass handwheels as well as numerous brass screws, giving the band saw an authentic, classic look.
Scope of delivery:
- Fully assembled band saw
Technical data
- Height: 162 mm
- Pulley diameter: 48 mm
- Wheel diameter: 50 mm
- Work table: 70 mm x 60 mm
- Weight: 250 g
Hersteller
Bengs ModellbauIm Kirchfelde 6
31675 Bückeburg
info@bengs-modellbau.de
Verantwortliche Person
Patrick BengsBengs Modellbau
Im Kirchfelde 6
31675 Bückeburg
info@bengs-modellbau.de
Login
Kunden kauften auch
The generator can be driven via a belt by a flame eater, Stirling engine, steam engine or an internal combustion engine to convert kinetic energy into electrical energy. If desired, you can also use this dynamo as a historical electric motor by simply supplying it with 12 volts. The model is based on a historical generator. The drive model visually matches Wilesco steam engines or drive models very well. The generator housing is made of plastic and was manufactured using the 3D printing process. The generator is standard electric motor. The electric motor generates electricity when it is driven. Screws and pulley are made of brass. Scope of delivery: Fully assembled generator Technical data Height: 53mm Diameter generator jacket: 40mm Diameter generator cover: 44mm Length: 83mm Pulley: 10mm/16mm Technical data of the electric motor used Operating voltage: 12 VCurrent consumption at maximum power: 0.56 APower max. 2.71 WTorque: 9.95 mNmSpeed: 2603 rpm
Round belt for driving drive models or small machines. The drive belt has a diameter of 2 mm and a roughened surface. It is made of highly flexible PU material. You can cut the strap to the desired length and then weld it by heating it (lighter or small blowtorch) and pressing it together. These flexible but still very stable straps are ideal for model making. The drive belt is delivered as a 1 m piece. Welding the drive belt is very easy. Use either a candle or a small burner with a soft flame. Hold both ends of the strap to the flame until the plastic begins to melt. Then press the two ends of the strap lightly against each other. After the material has cooled, the excess can be removed with a scalpel or small side cutters.