Worldwide shipping
Shipping with DHL
05722/892102
info@bengs-modellbau.de

Generator ready to run model plastic

Product information "Generator ready to run model plastic"
The generator can be driven via a belt by a flame eater, Stirling engine, steam engine or an internal combustion engine to convert kinetic energy into electrical energy. If desired, you can also use this dynamo as a historical electric motor by simply supplying it with 12 volts. The model is based on a historical generator. The drive model visually matches Wilesco steam engines or drive models very well.
The generator housing is made of plastic and was manufactured using the 3D printing process. The generator is standard electric motor. The electric motor generates electricity when it is driven. Screws and pulley are made of brass.

Scope of delivery: 

  • Fully assembled generator

Technical data

  • Height: 53mm
  • Diameter generator jacket: 40mm
  • Diameter generator cover: 44mm
  • Length: 83mm
  • Pulley: 10mm/16mm 

 Technical data of the electric motor used

  • Operating voltage: 12 V
  • Current consumption at maximum power: 0.56 A
  • Power max. 2.71 W
  • Torque: 9.95 mNm
  • Speed: 2603 rpm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

High temperature soft solder
High temperature soft solder with a melting point of 250 ° C is suitable for fittings, pipelines and components on steam engines, Stirling engines and flame eaters. The soft solder is filled with a flux that burns without residue when flame brazing (flux residues must be removed in the case of piston soldering !!!). If you need additional flux, you can use normal soft solder flux. Due to the increased melting point of 250 °, it is a good alternative to brazing. However, the high-temperature softening braze can not replace brazing. This product should not be used in the vicinity of the boiler. The use of silver solder is recommended. Wire diameter: 1mm Wire length: 1000mm This product is unleashed !!!
Product number: 3271

€2.40*
Socket wrench micro
The recessed wrench has a 2-component power handle with a torque and comfort-optimized grip zone. The blade is made of chrome vanadium steel, chrome plated. The socket wrench has a rotating centering cap. We have the twist grip socket wrenches for hexagonal screws available in two sizes. 3mm suitable for M2 model screw 4mm Suitable for M3 model screws and M2 Din 933 hexagon screws Optimal for technical model making.
Product number: 3083

€9.80*
Hexagonal screwdriver
The screwdriver has an ergonomically designed multi-component handle with a smoothly rotating cap (for fixing the fingertip of the index finger for precise work). The blades are made of high quality tool steel. The surface is matt chrome-plated. The hexagonal screwdrivers have a Hex-Plus profile that prevents the screw head from deforming and transmits more torque. This also allows an angular offset between screwdriver and screw of up to 10°. This makes screwing in places that are difficult to access much easier. These screwdrivers for hexagon socket screws are particularly suitable for model making. Hexagonal screwdriver for hexagon socket 1.5mm is suitable for: grub screws M3, cylinder screws with hexagon socket M2 Hexagonal screwdriver for hexagon socket 2mm is suitable for: grub screws M4, Hexagonal screwdriver for hexagon socket 2.5 mm is suitable for: grub screws M5, cylinder screws with hexagon socket M3 Hexagonal screwdriver for hexagon socket 2.5 mm is suitable for: grub screws M6, cylinder screws with hexagon socket M4  Technical data hexagonal screwdriver for hexagon socket Hexagon 1.5 mm / 2 mm / 2.5 mm / 3 mm Blade length 60 mm whole length 157 mm
Product number: 3088

€7.30*
Hexagonal screwdriver
The screwdriver has an ergonomically designed multi-component handle with a smoothly rotating cap (for fixing the fingertip of the index finger for precise work). The blades are made of high quality tool steel. The surface is matt chrome-plated. The hexagonal screwdrivers have a Hex-Plus profile that prevents the screw head from deforming and transmits more torque. This also allows an angular offset between screwdriver and screw of up to 10°. This makes screwing in places that are difficult to access much easier. These screwdrivers for hexagon socket screws are particularly suitable for model making. Hexagonal screwdriver for hexagon socket 1.5mm is suitable for: grub screws M3, cylinder screws with hexagon socket M2 Hexagonal screwdriver for hexagon socket 2mm is suitable for: grub screws M4, Hexagonal screwdriver for hexagon socket 2.5 mm is suitable for: grub screws M5, cylinder screws with hexagon socket M3 Hexagonal screwdriver for hexagon socket 2.5 mm is suitable for: grub screws M6, cylinder screws with hexagon socket M4  Technical data hexagonal screwdriver for hexagon socket Hexagon 1.5 mm / 2 mm / 2.5 mm / 3 mm Blade length 60 mm whole length 157 mm
Product number: 3085

€7.30*