Water level indicator
Product number:
1162
Product information "Water level indicator"
A water level indicator is used to read the water level in the steam boiler. Our water level indicators consist of 2 angle pieces that are connected by a glass tube. Since it is dangerous for the boiler to run dry, it is always recommended to install a water level indicator. At Bengs Modellbau you have the choice between a light and a heavy version. Depending on how big your steam boiler is, you can choose the right variant.
The water level indicator is made of brass, hard soldered and sandblasted. For assembly, a shaft can be pushed by unscrewing the sealing plugs. This is used for precise alignment of the screw-in bodies. If the glass breaks, the tube can be changed in no time. The water level indicator comes with a 100 mm long tube.
Water level indicator lightweight
- With a hole spacing of 60mm, the tube is visible for 35mm.
- Maximum hole spacing: 100mm
- Screw thread: M6x0.75< li> Height with union nut: 20mm
- Length part 1: 17mm Length part 2 with sealing plug: 26mm
- Largest diameter: 10mm
- Glass tube: 5mm x 100mm
Water level indicator heavy
- Schott Duran glass tube is 100% sealed with graphite Teflon tape.
- With a hole spacing of 80mm, the tube is visible for 45mm .
- Maximum hole spacing: 100mm
- Screw-in thread: M6x0.75
- Height with union nut: 30mm
- Length: 33mm
- Width: 15mm
- Glass tube: 5mm x 100mm
Login
Cutsomers also bought
Solder connection sleeve
€3.50*
Connecting sleeves for soldering into the steam boiler with two different fine threads. The soldering connection sleeves are inserted into a hole with a 10 mm diameter and can then be soldered hard or soft. The beeches are made of brass MS58. Thanks to the soldering connection sleeves, the parts attached to the steam boiler have a sufficiently stable and long screw-in thread.
The solder connection sleeve M6x0.75 fits our boiler accessories.The solder connection sleeve e M8x0.75 fits our safety valve with weight
The socket dimensions are always the same:
Soldering diameter: 10mm
Bundle diameter: 12mm
Height: 10mm
Safety valve
€28.60*
This safety valve is made of brass. It is significantly smaller than the weight safety valve. This makes it suitable for smaller boilers or steam systems. The safety valve is loaded with a stainless ball and spring. The screw-in thread of the pressure relief valve is M6x0.75. Our soldering sockets are best suited, which are soldered into the boiler in order to subsequently screw in the safety valve. Under no circumstances should a steam boiler be operated without a safety valve. The safety valve prevents the maximum pressure from being exceeded. The safety valve is set to 4bar, but can be adjusted. Dimensions of safety valve: Height with thread: 37mm Height without thread: 31mm Wrench size: 10 mm The matching Solder sleeve M6x0.75 can be found here.