Viton O-ring

Bengs Modellbau

€7.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Internal diameter

3mm

4mm

5mm

6mm

8mm

10mm

Thread size

1mm

2mm

Product number: 4313

Product information "Viton O-ring"

Round sealing ring made of Viton (FPM rubber 80 Shore).

The Viton O-ring is temperature-resistant from -15 ° C to + 200 ° C degrees. Resistant to oil, grease, petrol, alcohol, acids and alkalis. The material Viton has high abrasion and stability high tear strength. The excellent resistance to aging, combined with a very good compression set, make Viton the ideal material for demanding technical modeling.

One packaging unit contains 10 Viton O-rings.

The following Viton O-rings are available:

Viton O-rings Inner diameter 3mm Thread thickness 1mm

Viton O-rings Inner diameter 4mm Thread thickness 1mm

Viton O-rings Inner diameter 5mm Thread thickness 1mm

Viton O-rings Inner diameter 6mm Thread thickness 1mm

Viton O-rings Inner diameter 8mm Thread thickness 1mm

Viton O-rings Inner diameter 10mm Thread thickness 1mm

Viton O-rings Inner diameter 3mm Thread thickness 2mm

Viton O-rings Inner diameter 4mm Thread thickness 2mm

Viton O-rings Inner diameter 5mm Thread thickness 2mm

Viton O-rings inside diameter 6mm thread thickness 2mm

Viton O-rings inside diameter 8mm thread thickness 2mm

Viton O-rings Inner diameter 10mm Thread thickness 2mm

Viton O-rings Inner diameter 16mm Thread thickness 2mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Viton O-ring

Round sealing ring made of Viton (FPM rubber 80 Shore). The Viton O-ring is temperature-resistant from -15 ° C to + 200 ° C degrees. Resistant to oil, grease, petrol, alcohol, acids and alkalis. The material Viton has high abrasion and stability high tear strength. The excellent resistance to aging, combined with a very good compression set, make Viton the ideal material for demanding technical modeling. One packaging unit contains 10 Viton O-rings. The following Viton O-rings are available: Viton O-rings Inner diameter 3mm Thread thickness 1mm Viton O-rings Inner diameter 4mm Thread thickness 1mm Viton O-rings Inner diameter 5mm Thread thickness 1mm Viton O-rings Inner diameter 6mm Thread thickness 1mm Viton O-rings Inner diameter 8mm Thread thickness 1mm Viton O-rings Inner diameter 10mm Thread thickness 1mm Viton O-rings Inner diameter 3mm Thread thickness 2mm Viton O-rings Inner diameter 4mm Thread thickness 2mm Viton O-rings Inner diameter 5mm Thread thickness 2mm Viton O-rings inside diameter 6mm thread thickness 2mm Viton O-rings inside diameter 8mm thread thickness 2mm Viton O-rings Inner diameter 10mm Thread thickness 2mm Viton O-rings Inner diameter 16mm Thread thickness 2mm

Variants from €7.00*

€7.30*

Abil Dichtpapier zum Herstellen eigener Dichtungen

Abil N sealing material of Elring

The Abil N sealing material of Elring is a cellulose-based sealing paper with an NBR binder. It is suitable for sealing cylinder heads in combustion engines or cylinder covers in steam engines or Stirling engines. Abil can be used to seal against cooling water, oils, fuels and steam. If you want to use the sealing paper to seal steam or air, oil the finished seal well. With this material you can make your own seal. The 0.5mm thick sealing material can be cut perfectly with scissors, perforated iron or knife. Measurements Abil N sealing paper from Elring: 250mm x 210mm x 0.5mm Characteristics Abil N sealing paper from Elring: Color dark gray Temperature resistant up to 120 ° C (Durable) Short-term temperature-resistant up to 150 ° Pressure resistant up to 10 bar Resistant to air, oil, grease, fuel, water and radiator protection Application: For seals on housing covers, motors, gearboxes, valve covers or oil pans, Pneumatic or hydraulic systems. Both in model making, vintage restoration, crafts or industry

€3.10*

Viton O-ring

Variants from €7.00*

€8.00*

Tip

Silberhartlotstangen mit niedrigem Schmelzpunkt zum Löten im Modellbau

high-alloyed silver solder 1mm / 1,5mm

We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results. The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder. Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long. 1mm or 1.5mm diameter Silver solder bars L-Ag55 (55% silver) Working temperature 630 ° C Bengs Modellbau has used this silver solder bars for years.

€4.70*