Thread cutting ratchet

Gewindeschneidknarre zum einfachen Schneiden von Gewinde

€15.20*

Available, delivery time: 1-3 days

Product number: 3515

Product information "Thread cutting ratchet"

Thread cutting ratchet with two-jaw chuck for clamping square taps. The ratchet can be switched to left-hand, right-hand and fixed. Particularly suitable for thread cutting in hard-to-reach places. You can get the thread cutting ratchet from us in two different sizes. The small version is particularly suitable for model making.

The thread cutting ratchet is available in two versions different sizes.

Size = total length 85mm 100mm

Spanning width square 2.7mm - 4.9mm 4.9mm - 12mm

For taps M3 - M8 M4.5 - M12

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Verzinnungspaste zum verzinnen von größeren Bauteilen

Soft soldering paste

Soft soldering paste for brass, copper, steel and silver steel. The paste is applied thinly to the parts to be tinned and heated with a brazing lamp. For large-area soft soldering, it is optimal to tin- the parts beforehand. For example, we use the paste to pre-tine the cylinder and the mirror when constructing a model steam engine. The tinning paste can also be used optimally as a flux substitute. The soft soldering paste is excellently suitable as corrosion protection for steel parts. Bengs Modellbau uses the zinc paste for steel cylinders with a cooling water jacket. For example in the Flammenfresser Kurfürst. Stirring the paste before use is not necessary! The soft soldering paste may be diluted with water. Ready-to-use metal paste Contents: 50g Bottle with brush Click here for the modeling magazine: Soldering with soft solder paste and tin paste Soldering and tinning with soft soldering and tinning paste

Content: 0.1 Kilogramm (€102.00* / 1 Kilogramm)

€10.20*

Gewindelehre

The tap wrench is equipped with hardened clamping jaws and galvanized steel handles. When used in tight spaces, for example in model making, you can unscrew a steel handle. For particularly narrow applications, we recommend a tapping ratchet. You have 2 different tap wrenches to choose from in our shop. You can see which tap wrench fits in the table. Size Clamping range Total length Size 1 M1 - M8 130mm Size 2 M1 - M12 175mm

€10.90*

Schleifvlies zum Vorbereiten und Säubern von Lötstellen

abrasive fleece

This abrasive fleece or cleaning fleece is suitable for cleaning all metallic surfaces, preparing for brazing or soldering. But even after the brazing with silver solder and flux the pads are very good for cleaning the soldering seam. You can use pads for all materials used in technical modeling, such as brass, copper, steel and aluminum. The abrasive fleece has no metallic abrasion and is therefore also very suitable for stainless steel. The cleaning fleece does not leave any marks, so that a subsequent polishing of the components is not a problem. The sanding pads are very durable and can be used very often. Bengs Modellbau uses this cleaning fleece for soldering work regardless of whether brazing or soldering. The abrasive fleece is, of course, also suitable for cutting or milled brass parts. A pack of cleaning fleece contains 10 pads in the size 130mm x 60mm (Made in Germany)

€7.80*

Silberlotpaste ist eine Kombination aus Silberlot und Flussmittel

Soldering paste

Ready-to-use and dosing silver solder paste, 56% silver content (L-Ag55) with the working temperature 650 ° C. The silver solder paste is suitable for fine brazing. The hard solder paste is suitable for creating almost invisible soldering seams, even in inaccessible places. With our silver soldering paste, there are virtually no solder residues at the soldering point, which must be labored. No flux required. Dried silver soldering paste is made ready for use again with a few drops of water. Mix thoroughly before removing. Typical application examples for the silver soldering paste are: Apparatus and equipment for the food industry silver contacts Bronze and brass fittings Modelling piping Heat and cooling technology Fashion Jewelry glasses manufacturing Precision Engineering !!! The silver soldering paste is also suitable for kiln soldering (furnace should have a working temperature of at least 680 ° C) !!! Contents 10 g Here you will find a tutorial on how to braze with silver solder paste.

Content: 10 Gramm (€181.00* / 100 Gramm)

€18.10*