Skip to main content Skip to search Skip to main navigation
Worldwide shipping
Shipping with DHL
05722/892102
info@bengs-modellbau.de

Product information "Soldering brick"

The white soldering brick is ideal as a soldering base for brazing and soldering in model building. The solder seal can be cut as required. In addition, soldering and holding needles can be inserted very easily into the brick in order to fix the component to be soldered. The white tiles have a relatively smooth and plane surface, through which sharp edges several bricks can be assembled seamlessly. To fix components that are to be soldered, you can simply nail into the porous material of the soldering iron. Thus, a soldering device can be produced very quickly.

The soldering bricks are also suitable for the construction of a melting point. By assembling several soldering bricks, one can produce an excellent soldering place in which the gas flame of the burner can be optimally utilized.

Dimensions of the brazier: 220mm x 110mm x 30mm

Manufacturer "zu Jeddeloh GmbH"

Hersteller

zu Jeddeloh GmbH  
Otto-Hahn-Str. 69  
21423 Winsen / Luhe
info@zujeddeloh.de 

Verantwortliche Person

zu Jeddeloh GmbH   
Otto-Hahn-Str. 69   
21423 Winsen / Luhe 
info@zujeddeloh.de 


1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


1 review

4 November 2025 19:20

Review with rating of 5 out of 5 stars

Mein Holztisch wird's mir danken!

Wüsste nicht, was man sonst als Unterlage auf einem Holztisch nehmen sollte. Hab mittlerweile 3 davon, einen gab's heute gratis (eine Ecke war abgebrochen) und die halten wirklich einiges aus, was Hitze angeht. Mit Autogen-Brenner wird's irgendwann zu Glas bzw. es bilden sich kleine Täler im Ziegel aber das ist a völlig normal. Muss man halt ein bisschen aufpassen. Ich nutze 2 Ziegel als Schutzunterlage für den Tisch und einen oben drauf, dort stecke ich die Nadeln für die Befestigung der zu lötenden Teile rein.

Der Ziegel ist schon porös und man kann die Metallteile super darauf befestigen. Auch preislich völlig ok.

Skip product gallery

Kunden kauften auch

Tip
Silberhartlotstangen mit niedrigem Schmelzpunkt zum Löten im Modellbau

Average rating of 5 out of 5 stars

High-alloyed silver solder 1mm / 1,5mm

We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results. The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder. Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long. 1mm or 1.5mm diameter Silver solder bars L-Ag55 (55% silver) Working temperature 630 ° C Bengs Modellbau has used this silver solder bars for years.  

Product number: 3131M

Regular price: €9.70
Tip
Flux for silver solder
Flux for silver solder

When brazing, fluxes have the task of loosening and removing the oxide layers present on the soldering surfaces and preventing them from forming again during soldering. The flux is adjusted to the working temperature of our Silver hard solder matched. Before use, the flux for silver solder should be stirred well. Using the brush in the bottle, a thin layer can be applied to the component to be soldered. You can find detailed instructions in our model making magazine (Hard soldering with silver solder instructions). If the silver brazing flux has dried out, you can make it liquid again with distilled water. Brazing with silver solder rods without flux is not possible. When the flux is heated with the burner, the water it contains first evaporates. This can be seen in the final formation of small bubbles. When the component is heated further with the flux and the working temperature is reached, the flux paste begins to melt and becomes transparent. Now the moment has come where the silver solder can be added. The effective range of the flux for silver solder is between 500°C and 800°C. The flux is suitable for brazing copper, brass, gunmetal, steel and stainless steel. Tip: Flux residues and discoloration of the material can be optimally removed with our Satin brushes or remove with abrasive fleece. You can get the flux for silver solder from us in the packaging sizes: 50g. Bottle with brush 100g.Bottle without brush Safety Information Please observe the following hazard and precautionary statements when handling the silver soldering flux. Danger GHS05 – Corrosion GHS08 – Health Hazard Hazard Statements H318: Causes serious eye damage. H361fd: Suspected of damaging fertility. Suspected of damaging the unborn child. Precautionary Statements P280: Wear protective gloves/protective clothing/ eye protection/face protection/hearing protection. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER/doctor. P308+P313: IF exposed or concerned: Get medical advice/attention. P405: Store locked up. P501: Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard-determining components of labelling: Potassium fluoride, potassium metaborate, potassium pentaborate hydrate. UFI: TSA9-D0AD-D00Q-C4YK Always follow the information on the product label.

Product number: 31322M

Content: 100 Kilogramm (€0.12 / 1 Kilogramm)

Variants from €8.30
Regular price: €11.60
TL 2000 turbo torch soldering torch set from CFH
TL 2000 turbo torch soldering torch set from CFH

With this soldering torch you can braze or solder both fine parts, as well as larger components. No matter whether in model making, craftsmanship or in the goldsmith's shop. You get three different soldering nozzles (small, medium, large) to the handpiece. The small 10mm nozzle has a line of 1.4kw, the large 17mm soldering nozzle has an output of 2.75kw. So you have the right nozzle for every application. The hose for the gas burner has a connection thread of G3 / 8L and therefore fits into 1kg of propane bottles with a connection R 3/8 ". If you want to connect the turbocharger to an 11kg propane bottle you also need a pressure reducer 2.5 bar An adjustable pressure regulator for regulating the gas pressure is not necessary with this hand soldering machine, since the valve on the handpiece can be used to regulate the pressure very well, the flame temperature being between 1500 and 2000 ° C  Scope of delivery of the Turbobrenner Soldering torch Set: Burner handpiece with bend 1.5 m hose with brass screw connection G3 / 8L 3 burner nozzles, Ø 10, 14, 17 mm 2 screw wrenches 17 and 19 mm 2 flame temperature 1500 ° C. and 2000 ° C.

Product number: 3600

Regular price: €49.40
Tip
Lötziegel zum hartlöten
Solder brick thick

This soldering brick is an excellent base for using hablot or soft solder on. The brick is made of a porous material into which holding needles can be easily inserted, making it easy to create a soldering device. This soldering brick is twice as thick as our standard soldering brick 220mm x 110mm. This makes it significantly more stable but is also ideal for making a melting station. Solder brick dimensions: Length: 220mm Width: 110mm Thickness: 60mm

Product number: 3136

Regular price: €11.90
Keramiklötplatte zum Löten von kleinen Teilen im Modellbau
Ceramic brazing plate 150mm x 100mm

This ceramic brazing plate is ideal for all soldering work. The ceramic brazing plate is provided with 2.9mm mounting holes, so that the parts to be soldered can be fixed well on the soldering pad. The ceramic brazing plate is ideal for soldering in model construction. The soldering plate has a very flat surface on which you can align very well soldering parts. Mounting holes: Ø 2.9 mm Dimensions: 150mm x 100mm x 22mm The ceramic brazing plate is not suitable for brazing, it tends to tear in the case of irregular heating. Please use our soldering tin.

Product number: 3134

Regular price: €9.80