Sanding paper file

Bengs Modellbau

Schmirgelfeilen in verschiedenen Durchmessern

€1.80*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Grain size

Grain size K100

Körnung K220

Körnung K320

Körnung K600

Product number: 3494

Product information "Sanding paper file "

Dimensions of the emery files:

Length: 250 mm
Working length: 210 mm
Width: 20 mm
Height: 6 mm
Grain: K100, K220, K320, K600

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Sanding paper file

The flat emery file with a wooden handle is available in different grit sizes. The cleanly cut wooden strips are covered with sandpaper. The files are ideal for working on wood or metal. We also like to use the emery files in our workshop. Dimensions of the emery files: Length: 250 mm Working length: 210 mm Width: 20 mm Height: 6 mm Grain: K100, K220, K320, K600

Variants from €1.70*

€1.80*

Sanding paper file

Variants from €1.70*

€1.80*

Sanding paper file

Variants from €1.70*

€1.80*

Tip

Silberhartlotstangen mit niedrigem Schmelzpunkt zum Löten im Modellbau

high-alloyed silver solder 1mm / 1,5mm

We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results. The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder. Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long. 1mm or 1.5mm diameter Silver solder bars L-Ag55 (55% silver) Working temperature 630 ° C Bengs Modellbau has used this silver solder bars for years.

€4.70*