Safety valve with weight for steam model

Connecting sleeves for soldering into the steam boiler with two different fine threads. The soldering connection sleeves are inserted into a hole with a 10 mm diameter and can then be soldered hard or soft. The beeches are made of brass MS58. Thanks to the soldering connection sleeves, the parts attached to the steam boiler have a sufficiently stable and long screw-in thread. The solder connection sleeve M6x0.75 fits our boiler accessories.The solder connection sleeve e M8x0.75 fits our safety valve with weight  The socket dimensions are always the same: Soldering diameter: 10mm Bundle diameter: 12mm Height: 10mm

Check valves are installed in steam model construction between the feed water pump and the boiler. They are intended to prevent the boiler pressure from escaping via the feed water pipe. You can get the check valve from us in two different versions. You get it both as a straight-through check valve and as an angle check valve. The check valves have soldering nipples and union nuts. The desired copper pipe can simply be softly soldered into the means. The corner check valve can be inserted directly into a M6x0.75 The soldering socket must be screwed into the boiler. The check valves are spring loaded and work in any position. The flow direction is engraved on the valves. Straightway check valve Material: brass Length: 43 mm overall Diameter: SW 10 mm Connection: Conical soldering nipple with union nut for 4 mm pipe The elastomeric valve ball closes absolutely tightly. Flow direction engraved Angle check valve Material: brass Height: 30 mm overall Depth: 22 mm overall Diameter: 10 mm Connection: screw-in thread in bowl M6x0.75 mm with lock nut The elastomeric valve ball closes absolutely tightly.

A water level indicator is used to read the water level in the steam boiler. Our water level indicators consist of 2 angle pieces that are connected by a glass tube. Since it is dangerous for the boiler to run dry, it is always recommended to install a water level indicator. At Bengs Modellbau you have the choice between a light and a heavy version. Depending on how big your steam boiler is, you can choose the right variant. The water level indicator is made of brass, hard soldered and sandblasted. For assembly, a shaft can be pushed by unscrewing the sealing plugs. This is used for precise alignment of the screw-in bodies. If the glass breaks, the tube can be changed in no time. The water level indicator comes with a 100 mm long tube.Water level indicator lightweightWith a hole spacing of 60mm, the tube is visible for 35mm. Maximum hole spacing: 100mm Screw thread: M6x0.75< li> Height with union nut: 20mm Length part 1: 17mm Length part 2 with sealing plug: 26mm Largest diameter: 10mm Glass tube: 5mm x 100mmWater level indicator heavy Schott Duran glass tube is 100% sealed with graphite Teflon tape. With a hole spacing of 80mm, the tube is visible for 45mm . Maximum hole spacing: 100mm  Screw-in thread: M6x0.75 Height with union nut: 30mm  Length: 33mm  Width: 15mm  Glass tube: 5mm x 100mm

A water level indicator is used to read the water level in the steam boiler. Our water level indicators consist of 2 angle pieces that are connected by a glass tube. Since it is dangerous for the boiler to run dry, it is always recommended to install a water level indicator. At Bengs Modellbau you have the choice between a light and a heavy version. Depending on how big your steam boiler is, you can choose the right variant. The water level indicator is made of brass, hard soldered and sandblasted. For assembly, a shaft can be pushed by unscrewing the sealing plugs. This is used for precise alignment of the screw-in bodies. If the glass breaks, the tube can be changed in no time. The water level indicator comes with a 100 mm long tube.Water level indicator lightweightWith a hole spacing of 60mm, the tube is visible for 35mm. Maximum hole spacing: 100mm Screw thread: M6x0.75< li> Height with union nut: 20mm Length part 1: 17mm Length part 2 with sealing plug: 26mm Largest diameter: 10mm Glass tube: 5mm x 100mmWater level indicator heavy Schott Duran glass tube is 100% sealed with graphite Teflon tape. With a hole spacing of 80mm, the tube is visible for 45mm . Maximum hole spacing: 100mm  Screw-in thread: M6x0.75 Height with union nut: 30mm  Length: 33mm  Width: 15mm  Glass tube: 5mm x 100mm