Power Coat 4 PRO powder coating system
Product information "Power Coat 4 PRO powder coating system"
The Power Coat 4 PRO is a high-quality powder coating system for small to large areas. You will receive the powder coating gun in a high-quality plastic case in which everything has its place. This powder gun is significantly more robust than our standard powder coating system. This makes it suitable for use in commercial businesses and for ambitious DIY enthusiasts.
Advantages of powder coating over painting:
- Ready to use immediately without drying time
- Extremely robust and abrasion-resistant
- Optimal corrosion protection
- Environmentally friendly as no solvents
- Absolutely uniform surface quality
- Coating remains elastic e.g. for springs
The Power Coat 4 PRO has a 500 ml powder container so that even larger areas can be coated with powder without having to refill the coating powder in the meantime. Another advantage of this device is that there is a water separator and a pressure regulator directly on the powder gun. This makes setting the correct pressure much easier.
Scope of delivery:
- Powder coating device with Schuko earthing plug, stable ground clamp, water separator and pressure regulator
- Two 500ml powder containers to screw into the coating gun
- Funnel for easy filling of the powder containers
- Sturdy case for storage
- 14 pages German operating instructions
The Power Coat 4 PRO powder coating device is suitable for many different powder coating applications. With this powder coating system, even the smallest components can be easily powder coated. Even larger parts are no problem thanks to the 500 ml powder container. Our powder coating systems are very often used in the restoration of old motorcycles or cars. With this system it is possible to coat entire motorcycle frames or rims with powder varnish for coating. The result is indistinguishable from industrial powder coating. Powder coating is also very often used in technical model making because the finished surface is extremely robust, scratch-resistant and provides good corrosion protection.
Application examples
- powder coating of vintage car parts
- Powder coat motorcycle parts
- Powder coat rims
- Powder coating of small parts in technical model making
This powder gun is a Tribo powder coating system. The powder becomes statically charged in the barrel of the gun due to the friction on various materials. The device is connected to the earth conductor of the socket via a ground terminal and a Schuko plug, which means the component is grounded. Due to the electrostatic charge generated during the run, the coating powder adheres to the workpiece. This effect allows you to coat a variety of materials. The charging occurs when the powder particles touch the wall of the barrel of the powder gun, causing electrons to be released from the Teflon™ barrel. The powder paint particles are separated from the spray gun faster than the charge can be redistributed. This means that the powder particles remain charged and stick to any material. You do not need any additional electricity for the tribo process. The included plug is only the ground connection of the device.
Power Coat 4 PRO can process all coating powders that are suitable for Tribo systems.
Here in our online shop you will find suitable spare parts for the powder coating system. p>
Coating wood, tiles and glass
In contrast to conventional powder coating systems, this powder gun coating system can also be used to coat wood, tiles and glass. Since these materials are not conductive, the ground terminal cannot be connected here. This makes applying the powder a little more difficult. You should first make a sample to test the properties of the material and its behavior during powder coating.
What else is needed (not included)
Login