Modell check valve
Check valves are installed in steam model construction between the feed water pump and the boiler. They are intended to prevent the boiler pressure from escaping via the feed water pipe. You can get the check valve from us in two different versions. You get it both as a straight-through check valve and as an angle check valve. The check valves have soldering nipples and union nuts. The desired copper pipe can simply be softly soldered into the means. The corner check valve can be inserted directly into a M6x0.75 The soldering socket must be screwed into the boiler. The check valves are spring loaded and work in any position. The flow direction is engraved on the valves.
Straightway check valve
- Material: brass
- Length: 43 mm overall
- Diameter: SW 10 mm
- Connection: Conical soldering nipple with union nut for 4 mm pipe
- The elastomeric valve ball closes absolutely tightly.
- Flow direction engraved
Angle check valve
- Material: brass
- Height: 30 mm overall
- Depth: 22 mm overall
- Diameter: 10 mm
- Connection: screw-in thread in bowl M6x0.75 mm with lock nut
- The elastomeric valve ball closes absolutely tightly.
Login
Cutsomers also bought
