Hylomar universal Sealant

We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results. The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder. Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long. 1mm or 1.5mm diameter Silver solder bars L-Ag55 (55% silver) Working temperature 630 ° C Bengs Modellbau has used this silver solder bars for years.  

The Abil N sealing material of Elring is a cellulose-based sealing paper with an NBR binder. It is suitable for sealing cylinder heads in combustion engines or cylinder covers in steam engines or Stirling engines. Abil can be used to seal against cooling water, oils, fuels and steam. If you want to use the sealing paper to seal steam or air, oil the finished seal well. With this material you can make your own seal. The 0.5mm thick sealing material can be cut perfectly with scissors, perforated iron or knife. Measurements Abil N sealing paper from Elring: 250mm x 210mm x 0.5mm Characteristics Abil N sealing paper from Elring: Color dark gray Temperature resistant up to 120 ° C (Durable) Short-term temperature-resistant up to 150 ° Pressure resistant up to 10 bar Resistant to air, oil, grease, fuel, water and radiator protection Application: For seals on housing covers, motors, gearboxes, valve covers or oil pans, Pneumatic or hydraulic systems. Both in model making, vintage restoration, crafts or industry

Ready-to-use and dosing silver solder paste, 56% silver content (L-Ag55) with the working temperature 650 ° C. The silver solder paste is suitable for fine brazing. The hard solder paste is suitable for creating almost invisible soldering seams, even in inaccessible places. With our silver soldering paste, there are virtually no solder residues at the soldering point, which must be labored. No flux required. Dried silver soldering paste is made ready for use again with a few drops of water. Mix thoroughly before removing. Typical application examples for the silver soldering paste are: Apparatus and equipment for the food industry silver contacts Bronze and brass fittings Modelling piping Heat and cooling technology Fashion Jewelry glasses manufacturing Precision Engineering !!! The silver soldering paste is also suitable for kiln soldering (furnace should have a working temperature of at least 680 ° C) !!! Contents 10 g Here you will find a tutorial on how to braze with silver solder paste.

JB Weld is considered to be the strongest glue in the world! It was developed 30 years ago in the USA and sold millions of times. It is located in almost every household. The 2-component epoxy resin adhesive is universally applicable and creates truly durable connections. With this adhesive, metallic materials such as cast iron, gray cast iron, steel, aluminum, brass, bronze, copper and tin can be cold-welded. The all-purpose adhesive also unbreakably combines wood, glass, ceramic or plastic. J-B Weld sticks everything - permanently and super fast. The all-purpose adhesive consists of 2 components. On the one hand there is the hardener (also called activator), in the red tube, on the other hand the part called by the manufacturer as "steel" in the black tube. This is made of epoxy resin and some other components. Both components are mixed together in equal proportions, whereby the reaction process of the curing (polymerization) is initiated. After mixing the 2 components, JB Weld can be processed for 25 minutes. After 8-15 hours, the adhesive is fully cured. Now, as if it were metal, it can be painted, painted, sawn, doweled, sanded or sanded. JB Weld does not shrink and tear during the curing process. A clean adhesive tape remains clean (as with soldering or welding), a smooth surface remains smooth. This makes JB Weld ideal where high-precision work is required. In the commercials of the manufacturer it is advertised that this all-purpose glue can reliably stick cracks in engine blocks. The cured adhesive is water resistant / steam resistant, withstand temperatures up to 300 ° C, oils, acids and chemicals (even battery acid). From the hands, it can be washed with water and soap after processing. Does not smell, since without solvent. In addition, the JB world is ideally suited for filling and gluing parts that are to be coated with the EasyCoat powder coating system. Opened for 5 years! Contents: 2 x 28g Permanently joins metal, plastic, ceramics, wood, glass, masonry, etc.   Ideal for filling cavities in castings   Seals pipes and fittings   Instead of welding, soldering, doweling   Can be drilled, painted, sanded   Temperature resistant up to 300 ° C   Water resistant and steam test   Resists oils, acids and chemicals   Tensile strength: 278 kg / qcm   Suitable for filling and gluing powder coating parts