Hexagon nuts DIN934
Product information "Hexagon nuts DIN934"
We have the hexagon nuts DIN934 in the materials galvanized steel, stainless steel and brass. The hexagonal nuts in small diameters are ideal for model making.
Material: galvanized steel / stainless steel / brass
Packaging unit: 50 pieces
The following sizes are available:
- M2
- M3
- M4
- M5
- M6
- M8
Login
Cutsomers also bought
Hexagon nuts DIN934
€7.00*
We have the hexagon nuts DIN934 in the materials galvanized steel, stainless steel and brass. The hexagonal nuts in small diameters are ideal for model making.
Material: galvanized steel / stainless steel / brassPackaging unit: 50 pieces
The following sizes are available:
M2
M3
M4
M5
M6
M8
Variants from €3.60*
Threaded rod DIN 975
€4.40*
The threaded rods are available in brass Ms58 or stainless steel A2 in the diameters M2, M3, M4, M5 and M6. They can be used either as stud bolts, adjusting spindle drive shaft or as screwdrivers.
A packing unit contains 2 threaded rods 250mm long.
Threaded rod DIN 975 / brass M2
Threaded rod DIN 975 / brass M3
Threaded rod DIN 975 / brass M4
Threaded rod DIN 975 / brass M5
Threaded rod DIN 975 / brass M6
Threaded rod DIN 975 / stainless steel M2
Threaded rod DIN 975 / stainless steel M3
Threaded rod DIN 975 / stainless steel M4
Threaded rod DIN 975 / stainless steel M5
Threaded rod DIN 975 / stainless steel M6
Variants from €3.40*
Model screws
€5.90*
Here you will find model construction screws in various diameters and lengths made of brass. A model bucket with a hex head has a smaller key width and a higher head compared to standard hex head screws. With model screws, you can give your steam engine, Stirling engine or Flammenfresser an authentic appearance. Since the screws used at the time of steam engines or station heaters were similar in proportions. In addition, the smaller heads consume less space on your model machine and they can be placed closer. We recommend that you use our Micro plug to mount the model screws. One packaging unit includes 25 model hexagon bolts.
The following model screws are available at any time.
Model building screw brass SW. 3mm M2x5mm / head height 2 mm
Model building screw brass SW. 3mm M2x6mm / head height 2 mm
Model building screw brass SW. 3mm M2x10mm / head height 2 mm
Model building screw brass SW. 4mm M3x8mm / head height 1.7 mm
Model building screw brass SW. 4mm M3x15mm / head height 2,5 mm
Price per 25 pieces in EUR.
Tip
high-alloyed silver solder 1mm / 1,5mm
€4.70*
We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results.
The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder
If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder.
Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long.
1mm or 1.5mm diameter
Silver solder bars L-Ag55 (55% silver)
Working temperature 630 ° C
Bengs Modellbau has used this silver solder bars for years.