Glasöler regelbar online kaufen

Glass oiler acrylic glass

These glass oilers for model making are made from brass. The sight glass is made of impact-resistant acrylic glass. Both sizes have a connection thread with an M3 meter standard thread. The glass oilers have a fixed flow rate. The flow hole is 1.0mm. The oilers are designed as cup oilers and do not have a top lid. The real glass oilers can be installed on cylinders of flame eaters and Assemble Stirling engines. Of course, the glass oilers also look very good on eccentrics, bearing blocks of steam engines or internal combustion engines. The oilers are available in 2 different sizes. Dimensions of glass oiler 6mm cannot be adjusted Total height: 20.5mm Diameter glass: 5mm Largest diameter: 6mm Connection thread: M3 Dimensions of glass oiler 8mm cannot be adjusted Total height: 27mm Diameter glass: 7mm Largest diameter: 8mm Connection thread: M3

€6.90*

High temperature soft solder

High temperature soft solder with a melting point of 250 ° C is suitable for fittings, pipelines and components on steam engines, Stirling engines and flame eaters. The soft solder is filled with a flux that burns without residue when flame brazing (flux residues must be removed in the case of piston soldering !!!). If you need additional flux, you can use normal soft solder flux. Due to the increased melting point of 250 °, it is a good alternative to brazing. However, the high-temperature softening braze can not replace brazing. This product should not be used in the vicinity of the boiler. The use of silver solder is recommended. Wire diameter: 1mm Wire length: 1000mm This product is unleashed !!!

€2.40*

Abil Dichtpapier zum Herstellen eigener Dichtungen

Abil N sealing material of Elring

The Abil N sealing material of Elring is a cellulose-based sealing paper with an NBR binder. It is suitable for sealing cylinder heads in combustion engines or cylinder covers in steam engines or Stirling engines. Abil can be used to seal against cooling water, oils, fuels and steam. If you want to use the sealing paper to seal steam or air, oil the finished seal well. With this material you can make your own seal. The 0.5mm thick sealing material can be cut perfectly with scissors, perforated iron or knife. Measurements Abil N sealing paper from Elring: 250mm x 210mm x 0.5mm Characteristics Abil N sealing paper from Elring: Color dark gray Temperature resistant up to 120 ° C (Durable) Short-term temperature-resistant up to 150 ° Pressure resistant up to 10 bar Resistant to air, oil, grease, fuel, water and radiator protection Application: For seals on housing covers, motors, gearboxes, valve covers or oil pans, Pneumatic or hydraulic systems. Both in model making, vintage restoration, crafts or industry

€3.10*

Glass oiler acrylic glass

These glass oilers for model making are made from brass. The sight glass is made of impact-resistant acrylic glass. Both sizes have a connection thread with an M3 meter standard thread. The glass oilers have a fixed flow rate. The flow hole is 1.0mm. The oilers are designed as cup oilers and do not have a top lid. The real glass oilers can be installed on cylinders of flame eaters and Assemble Stirling engines. Of course, the glass oilers also look very good on eccentrics, bearing blocks of steam engines or internal combustion engines. The oilers are available in 2 different sizes. Dimensions of glass oiler 6mm cannot be adjusted Total height: 20.5mm Diameter glass: 5mm Largest diameter: 6mm Connection thread: M3 Dimensions of glass oiler 8mm cannot be adjusted Total height: 27mm Diameter glass: 7mm Largest diameter: 8mm Connection thread: M3

Variants from €6.90*

€8.00*

Glass oilers

Dimensions of glass oiler 12mm adjustable

Glass oilers

Dimensions of glass oiler 12mm adjustable

Login