Random Contour Sander

The white soldering brick is ideal as a soldering base for brazing and soldering in model building. The solder seal can be cut as required. In addition, soldering and holding needles can be inserted very easily into the brick in order to fix the component to be soldered. The white tiles have a relatively smooth and plane surface, through which sharp edges several bricks can be assembled seamlessly. To fix components that are to be soldered, you can simply nail into the porous material of the soldering iron. Thus, a soldering device can be produced very quickly. The soldering bricks are also suitable for the construction of a melting point. By assembling several soldering bricks, one can produce an excellent soldering place in which the gas flame of the burner can be optimally utilized. Dimensions of the brazier: 220mm x 110mm x 30mm

For the somewhat coarser soldering work in the model making, craft or industry, we have flux coated silver solder bars with the diameter 1,5mm or 2mm. The flux range for the silver solder is between 500 ° C and 800 ° C. A further addition of brazing flux is not necessary. Of course, these silver solder bars also consist of the high-quality Lot L-Ag55 with the working temperature of 630 ° C. Especially when brazing brass, a low working temperature is of crucial importance. The high silver content in the solder not only reduces the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. Silver solder rods coated with flux are suitable for brazing brass, copper, heavy metals, rusting steels and stainless steel. All materials can, of course, also be joined together. The advantage of these flux-coated silver solder bars is that you do not need any additional flux. In our model magazine you will find a guide how to braze flux-coated silver brace brakes. Flux-coated High-silver Brazing Alloy Diameter 1,5mm or 2mm Length 500mm Silver solder bars L-Ag55 (55% silver) Working temperature: 630C ° No additional flux needed Cd free Video: Flux-coated High-silver Brazing Alloy

Der Arbortech Mini Turbo Kit ist ein revolutionäres Werkzeug um Holz zu bearbeiten. Es kann entweder direkt auf dem Arbortech Mini Grinder oder mithilfe eines Verlängerungsadapters auf einem Standard 115mm Winkelschleifer benutzt werden. Die kleine Frässcheibe ist ein ideales Werkzeug, um Freihand oder mit Schablonen sehr akkurat Holz zu bearbeiten. Bisher unmögliche Bearbeitungen beim Holz schnitzen sind jetzt möglich. Der Mini Turbo von Arbortech ist ein perfektes Holzwerkzeug für Holzskulpturen oder ähnliche Projekte aus Holz. Die Frässcheibe ist ein Profiwerkzeug mit auswechselbaren Hartmetallschneiden. Sollten die Hartmetallschneiden einmal stumpf sein, können Sie mit dem beiliegenden Schlüssel gelöst werden und um 180° gedreht werden, so dass die Schneiden wieder scharf sind. Ersatzschneiden für den Arbortech Mini Turbo bekommen Sie natürlich auch hier bei uns im Bengs Modellbaushop. Im Lieferumfang Mini Turbo Kit enthalten:  Arbortech Mini Turbo Frässcheibe  Erweiterungsadapter für Winkelschleifer  Messing Adapter  4 Sandpapier Schreiben mit verschiedenen Körnungen  Schrauben und Steckschlüssel

When brazing, fluxes have the task of loosening and removing the oxide layers present on the soldering surfaces and preventing them from forming again during soldering. The flux is adjusted to the working temperature of our Silver hard solder matched. Before use, the flux for silver solder should be stirred well. Using the brush in the bottle, a thin layer can be applied to the component to be soldered. You can find detailed instructions in our model making magazine (Hard soldering with silver solder instructions). If the silver brazing flux has dried out, you can make it liquid again with distilled water. Brazing with silver solder rods without flux is not possible. When the flux is heated with the burner, the water it contains first evaporates. This can be seen in the final formation of small bubbles. When the component is heated further with the flux and the working temperature is reached, the flux paste begins to melt and becomes transparent. Now the moment has come where the silver solder can be added. The effective range of the flux for silver solder is between 500°C and 800°C. The flux is suitable for brazing copper, brass, gunmetal, steel and stainless steel. Tip: Flux residues and discoloration of the material can be optimally removed with our Satin brushes or remove with abrasive fleece. You can get the flux for silver solder from us in the packaging sizes: 50g. Bottle with brush 100g.Bottle without brush