Mini Turbo Kit

Special soldering wire for soft soldering stainless steel and steel but also non-ferrous metals such as brass and copper. Very easy to use and all metals mentioned can be combined with each other. The flux contained in the wire is characterized by high temperature resistance. Optimum wetting on a wide variety of stainless steel makes this lead-free soft solder wire a top product. The use of additional flux is usually not necessary. The soft solder remains shiny even after long-term use of the soldered workpieces and has a very good color match to stainless steel. Processing instructions for soft soldering stainless steel Heat the components to be connected with the soldering torch to approx. 250°C and feed the wire. The flux flows out of the wire and spreads to the soldering point. The solder melts and wets the material where the flux could previously work. Then let the component cool down and remove any flux residue with water. Only suitable for 1.4301, 1.4305 or similarly alloyed stainless steels. Not suitable for higher alloyed (V4A) stainless steel qualities. Technical information soft solder for stainless steel Melting range: 221 °C Working temperature: 280C° - 350C° max. Continuous operating temperature: 100°C Low temperature resistance: - 200°C suitable for soldering in the field of food technology Lead-free Wire diameter: 1.5mm Wire length: 1000mm Suitable for soldering the following base materials Stainless steel (1.4301, 1.4305) Copper Brass Bronze Steel Carbide metals and connections of the materials mentioned with one another  

Grinding ball/sanding ball made of abrasive fleece with a diameter of 75mm. The abrasive material is firmly mounted on a 6mm mandrel. You can use the grinding ball in a drill press, die grinder, drill, cordless drill. The maximum speed must not exceed 10,000 revolutions/min. The sanding ball is ideal for derusting, satin finishing and removing paint from hard-to-reach areas such as internal and external curves. It is suitable for wood, steel, non-ferrous metals, plastics, and much more. applicable. Professional quality with layered fleece elements. The following grinding ball variants are available:  Fleece grinding ball ø 75mm grain 80 coarse (brown)  Fleece grinding ball ø 75mm grain 120 medium (green)  Fleece grinding ball ø 75mm grain 600 extra fine (gray)

Der Industrial Woodcarver von Arbortech ist die Weiterentwicklung vom klassischen Woodcarver. Der Vorteil dieser Frässcheibe ist das die Klingen aus Hartmetallplättchen bestehen. Die runden Hartmetallplättchen können 2-3 Mal gedreht werden, so dass Sie immer wieder scharfe Klingen zur Verfügung haben. Selbst härteste Hölzer sind somit kein Problem. Sogar einen im Holz eingewachsener Stahlnagel macht dem Industrial Woodcarver nichts aus. Wenn die Plätzchen komplett stumpf sind, bekommen Sie bei uns natürlich als Ersatzteil. Aber keine Sorge die Lebenszeit der Hartmetallplättchen ist 25 mal länger, als die der Schneiden des normalen Pro-4 Woodcarver von Arbortech. Der Industrial Woodcarver verwandelt Ihren Winkelschleifer in eine Holz Fräse. Er passt auf alle gängigen 100mm und 115mm Winkelschleifer. Er wurde speziell für den professionellen Anwender designt. Der Industrial Woodcarver ist die professionelle Wahl, wenn es um Freihand Holzschnitzen geht. Die Hartmetallklingen des Woodcarver schnitzen das härteste, als auch das weichste Holz mit gleicher Glätte, Effizienz und Kontrolle. Je härter das Holz ist, desto besser funktioniert der Industrial Woodcarver.