Worldwide shipping
Shipping with DHL
05722/892102
info@bengs-modellbau.de

Kaindl Woodcarver Gold

Product information "Kaindl Woodcarver Gold"

The shape of the cutting edge of the Kaindl Woodcarver Gold is reminiscent of a chainsaw. In fact, the cutting tooth of this wood carving cutter has the same shape as a chainsaw tooth. However, the Woodcarver also has an all-round limitation on the cutting depth.

The cutting depth is limited to 0.4mm per cut from the tip of the cutting edge to the bottom of the tooth. This gives us an absolutely kickback-free tool. In contrast to almost all other milling tools on the market. The Kaindl Woodcarver Gold from the company Kaindl Schleiftechnik is an ideal tool for all wood craftsmen, Plumbers, model makers, boat builders and sculptors, whether in industry for craftsmen or do-it-yourselfers.

You can use the Woodcarver to mill, cut, mill grooves and carve shapes of solid wood. You can work on solid wood, chipboard, plastics, plaster (no stone!). With the carving cutter you can remove a lot of material in a very short time but also work very delicately. The Woodcarver from Kaindl works absolutely kickback-free thanks to its chip thickness limiters. The carving cutter can be used in all directions, both right and left as well as up and down. The Woodcarver has a big advantage over sanding. Because you are carving away the material and not sanding it, you prevent excessive dust formation and heat generation (burning for wood, smearing for plastics).

You can easily mount the 115mm woodcarver disc on your 115mm or 125mm winding sander (Flex). Since an angle grinder is available in most workshops, no new power tool is required. A useful extension is the original Kaindl cover with a connection for a vacuum cleaner or dust extraction. This means you can work safely and without chips even indoors. The professional association approval is only valid in conjunction with the Kaindl dust protection hood.

If the Woodcarver ever becomes blunt, that's no problem, it can be re-sharpened relatively easily. Since the Kaindl carving cutter is made of plasma nitrided, carbonized steel and has a hardness of 62 Rockwell, it cannot be sharpened with a conventional file like a chainsaw, for example. However, it can either be used with the diamond file from Kaindl or with the Diamond grinding point can be sharpened very well. Detailed sharpening instructions can be found in the operating instructions supplied. Since the steel of the Woodcarver has a hardness of 62 Rockwell, it is very difficult to sharpen with conventional files or grinding points.

Characteristics of the Kaindl Woodcarver Gold

  •  Diameter 115 mm
  •  Steel with a hardness of 62 Rockwell
  •  Maximum speed under load 11,000 RPM
  •  Milling depth max. 30 mm, milling width 9 mm
  •  Fits all 115mm and 125mm angle grinders
  •  Wear safety glasses during all work!
  •  Made in Germany / Kaindel grinding technology

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Diamond grinding point
This diamond grinding point is suitable for sharpening and grinding a wide variety of materials such as silver steel, HSS steel and solid carbide. Even tiles can be worked on with this diamond grinding pen. The diamond grinding point has the usual quality from Kaindl and is particularly stable. The grinding point has a diameter of 6.5mm and a length of 55mm. We recommend the diamond grinding point for re-sharpening the Kaindl Woodcarvers Gold. Since the Woodcarver is made of plasma nitrided, carbonized steel with a hardness of 62 Rockwell, it cannot be sharpened with conventional files or grinding points.
Product number: 3545

€7.70*
Grinding ball abrasive fleece
Grinding ball/sanding ball made of abrasive fleece with a diameter of 75mm. The abrasive material is firmly mounted on a 6mm mandrel. You can use the grinding ball in a drill press, die grinder, drill, cordless drill. The maximum speed must not exceed 10,000 revolutions/min. The sanding ball is ideal for derusting, satin finishing and removing paint from hard-to-reach areas such as internal and external curves. It is suitable for wood, steel, non-ferrous metals, plastics, and much more. applicable. Professional quality with layered fleece elements. The following grinding ball variants are available:  Fleece grinding ball ø 75mm grain 80 coarse (brown)  Fleece grinding ball ø 75mm grain 120 medium (green)  Fleece grinding ball ø 75mm grain 600 extra fine (gray)
Product number: 3672

€14.10*
Grinding ball abrasive fleece
Grinding ball/sanding ball made of abrasive fleece with a diameter of 75mm. The abrasive material is firmly mounted on a 6mm mandrel. You can use the grinding ball in a drill press, die grinder, drill, cordless drill. The maximum speed must not exceed 10,000 revolutions/min. The sanding ball is ideal for derusting, satin finishing and removing paint from hard-to-reach areas such as internal and external curves. It is suitable for wood, steel, non-ferrous metals, plastics, and much more. applicable. Professional quality with layered fleece elements. The following grinding ball variants are available:  Fleece grinding ball ø 75mm grain 80 coarse (brown)  Fleece grinding ball ø 75mm grain 120 medium (green)  Fleece grinding ball ø 75mm grain 600 extra fine (gray)
Product number: 3674

€14.10*
JB Weld Adhesive - 2K epoxy resin adhesive
JB Weld is considered to be the strongest glue in the world! It was developed 30 years ago in the USA and sold millions of times. It is located in almost every household. The 2-component epoxy resin adhesive is universally applicable and creates truly durable connections. With this adhesive, metallic materials such as cast iron, gray cast iron, steel, aluminum, brass, bronze, copper and tin can be cold-welded. The all-purpose adhesive also unbreakably combines wood, glass, ceramic or plastic. J-B Weld sticks everything - permanently and super fast. The all-purpose adhesive consists of 2 components. On the one hand there is the hardener (also called activator), in the red tube, on the other hand the part called by the manufacturer as "steel" in the black tube. This is made of epoxy resin and some other components. Both components are mixed together in equal proportions, whereby the reaction process of the curing (polymerization) is initiated. After mixing the 2 components, JB Weld can be processed for 25 minutes. After 8-15 hours, the adhesive is fully cured. Now, as if it were metal, it can be painted, painted, sawn, doweled, sanded or sanded. JB Weld does not shrink and tear during the curing process. A clean adhesive tape remains clean (as with soldering or welding), a smooth surface remains smooth. This makes JB Weld ideal where high-precision work is required. In the commercials of the manufacturer it is advertised that this all-purpose glue can reliably stick cracks in engine blocks. The cured adhesive is water resistant / steam resistant, withstand temperatures up to 300 ° C, oils, acids and chemicals (even battery acid). From the hands, it can be washed with water and soap after processing. Does not smell, since without solvent. In addition, the JB world is ideally suited for filling and gluing parts that are to be coated with the EasyCoat powder coating system. Opened for 5 years! Contents: 2 x 28g Permanently joins metal, plastic, ceramics, wood, glass, masonry, etc.   Ideal for filling cavities in castings   Seals pipes and fittings   Instead of welding, soldering, doweling   Can be drilled, painted, sanded   Temperature resistant up to 300 ° C   Water resistant and steam test   Resists oils, acids and chemicals   Tensile strength: 278 kg / qcm   Suitable for filling and gluing powder coating parts
Product number: 3501

€14.10*