steel pulley 58mm

Bengs Modellbau

€15.20*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Product number: 6017

Product information "steel pulley 58mm"

This steel pulley has an outer diameter of 58 mm. The belt pulley was made in the lost wax process and thus has a very clean and fine surface. The belt pulley is designed for use on model-building combustion engines, Stirling engines, flame guns or steam engines. On these model machines it can be used either as a belt pulley or as a flywheel. It can also be used as a wheel for a model caravan. The belt pulley is supplied as raw material. Due to the clean castings, processing of the outer surfaces is not absolutely necessary.

Dimensions of the 58mm pulley:

Raw diameter: 58mm
Finish diameter: 57mm
Width on the hoop: 20mm
Width at the waist: 20mm
Diameter of collar: 15mm
Weight: 170g
Material: Cast steel (no gray cast iron)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Flywheel 140mm

The flywheel for flame eaters, Stirling engines or steam engines. The flywheels are produced in the lost wax process. The advantage of this casting process is that the casting has a very high quality and dimensional stability. Blisters and hard spots are excluded in the lost wax process. The flywheel has a raw diameter of 141mm. The angles are already polished. The flywheel is cleaned and sandblasted. The flywheel must still be finished by you on its lathe. It is suitable both for use as a flywheel on a model machine and as a tire for a cannon or a caterpillar. Dimensions of the flywheels: Raw diameter: 141mm Finish diameter: 140mm Diameter of the scar: 22mm Width: 19mm Wide scar: 26mm Weight: 800g. Material: cast steel (no gray cast iron)

€38.00*

Modellbauschrauben in verschiedenen Längen und Durchmesser

Model screws

Here you will find model construction screws in various diameters and lengths made of brass. A model bucket with a hex head has a smaller key width and a higher head compared to standard hex head screws. With model screws, you can give your steam engine, Stirling engine or Flammenfresser an authentic appearance. Since the screws used at the time of steam engines or station heaters were similar in proportions. In addition, the smaller heads consume less space on your model machine and they can be placed closer. We recommend that you use our Micro plug to mount the model screws. One packaging unit includes 25 model hexagon bolts. The following model screws are available at any time. Model building screw brass SW. 3mm M2x5mm / head height 2 mm Model building screw brass SW. 3mm M2x6mm / head height 2 mm Model building screw brass SW. 3mm M2x10mm / head height 2 mm Model building screw brass SW. 4mm M3x8mm / head height 1.7 mm Model building screw brass SW. 4mm M3x15mm / head height 2,5 mm Price per 25 pieces in EUR.

Variants from €5.90*

€6.00*

Leichtes Schwungrad 80 mm sehr sauberer guss

flywheel 80mm light

This flywheel has an outer diameter of 81mm, it has 12 spokes which are only 2mm thick and 3mm deep. Due to the filigree appearance, it is particularly suitable for Stirling engines and flame eaters. Of course, the flywheels are also suitable as wheels for a motor laffeet or a cannon-booster. The flywheels are produced in the lost wax process. The advantage of this casting process is that the casting has a very high quality and dimensional stability. Blisters are excluded in the lost wax process. The sprue has already been polished. The flywheel is cleaned and sandblasted. Dimensions of the 80mm flywheel: Raw diameter: 81mm Finish diameter: 80mm Width on the hoop: 15mm Width at the waist: 17mm Diameter of the collar: 13mm Weight: 180g Material: Cast steel (no gray cast iron)

€21.20*

Silberstahl Rundmaterial in verschiedenen Durchmessern

Silver steel 115 Cr V3

115 Cr V3 Silver steel round material is suitable for the production of shafts, piston rods or for the construction of crankshafts for steam engines and Stirling engines in model construction. The silver steel is hardenable and can thus also be used for heavily stressed tools, for example punch punches. We supply the 115 Cr V3 silver steel in 300mm sections. The silver bars are well suited for running in ball bearings. Features 115 Cr V3 silver steel Material No. 1.2210 bright drawn wear-resistant tool steel (hardenable) The orderable sections are 300mm long.

Variants from €3.20*

€3.90*