Free shipping from 150€
Shipping with DHL
05722/892102
info@bengs-modellbau.de
Go to homepage
Shopping cart €0.00*

hard copper tube Sf-Cu

Bengs Modellbau
Hartes Kupferrohr als Stangenmaterial

€11.10*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Diameter
Product number: 5022
Product information " hard copper tube Sf-Cu"

The hard copper tube Sf-Cu is suitable for all applications in steam model construction and for technical model construction. In contrast to the soft copper tube, this copper tube is delivered straight in the bar. If you want to install a straight line, we recommend using this copper pipe. It is suitable for steam lines, fuel lines and cooling water pipes. If the copper tube should be bent once you can burn it with the burner before, afterwards it can bend excellent. The copper tube hard can be easily soldered and brazed. For brazing, we recommend our AG-55 silver braze bars.

Matching flanges and fittings for model building you here.

The CU pipe is supplied as a straight piece

1 Packing unit consists of 3x 330mm long bars. Total length 1000mm

The following copper tubes are available:

  • 2mm x 0.3mm round tube
  • 3mm x 0.5mm round tube
  • 4mm x 0.5mm round tube
  • 5mm x 0.5mm round tube
  • 6mm x 0.5mm round tube
  • 8mm x 1mm round tube

kupferrohr-hart-cu-rohr

If you need brass pipes, click here (brass pipe Ms63)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Cutsomers also bought

Hartes Kupferrohr als Stangenmaterial
hard copper tube Sf-Cu
The hard copper tube Sf-Cu is suitable for all applications in steam model construction and for technical model construction. In contrast to the soft copper tube, this copper tube is delivered straight in the bar. If you want to install a straight line, we recommend using this copper pipe. It is suitable for steam lines, fuel lines and cooling water pipes. If the copper tube should be bent once you can burn it with the burner before, afterwards it can bend excellent. The copper tube hard can be easily soldered and brazed. For brazing, we recommend our AG-55 silver braze bars. Matching flanges and fittings for model building you here. The CU pipe is supplied as a straight piece 1 Packing unit consists of 3x 330mm long bars. Total length 1000mm The following copper tubes are available: 2mm x 0.3mm round tube 3mm x 0.5mm round tube 4mm x 0.5mm round tube 5mm x 0.5mm round tube 6mm x 0.5mm round tube 8mm x 1mm round tube If you need brass pipes, click here (brass pipe Ms63)

€9.50*
Hartes Kupferrohr als Stangenmaterial
hard copper tube Sf-Cu
The hard copper tube Sf-Cu is suitable for all applications in steam model construction and for technical model construction. In contrast to the soft copper tube, this copper tube is delivered straight in the bar. If you want to install a straight line, we recommend using this copper pipe. It is suitable for steam lines, fuel lines and cooling water pipes. If the copper tube should be bent once you can burn it with the burner before, afterwards it can bend excellent. The copper tube hard can be easily soldered and brazed. For brazing, we recommend our AG-55 silver braze bars. Matching flanges and fittings for model building you here. The CU pipe is supplied as a straight piece 1 Packing unit consists of 3x 330mm long bars. Total length 1000mm The following copper tubes are available: 2mm x 0.3mm round tube 3mm x 0.5mm round tube 4mm x 0.5mm round tube 5mm x 0.5mm round tube 6mm x 0.5mm round tube 8mm x 1mm round tube If you need brass pipes, click here (brass pipe Ms63)

Variants from €9.50*
€9.80*
Tip
Silberhartlotstangen mit niedrigem Schmelzpunkt zum Löten im Modellbau
high-alloyed silver solder 1mm / 1,5mm
We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results. The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder. Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long. 1mm or 1.5mm diameter Silver solder bars L-Ag55 (55% silver) Working temperature 630 ° C Bengs Modellbau has used this silver solder bars for years.  

€4.70*
Hartes Kupferrohr als Stangenmaterial
hard copper tube Sf-Cu
The hard copper tube Sf-Cu is suitable for all applications in steam model construction and for technical model construction. In contrast to the soft copper tube, this copper tube is delivered straight in the bar. If you want to install a straight line, we recommend using this copper pipe. It is suitable for steam lines, fuel lines and cooling water pipes. If the copper tube should be bent once you can burn it with the burner before, afterwards it can bend excellent. The copper tube hard can be easily soldered and brazed. For brazing, we recommend our AG-55 silver braze bars. Matching flanges and fittings for model building you here. The CU pipe is supplied as a straight piece 1 Packing unit consists of 3x 330mm long bars. Total length 1000mm The following copper tubes are available: 2mm x 0.3mm round tube 3mm x 0.5mm round tube 4mm x 0.5mm round tube 5mm x 0.5mm round tube 6mm x 0.5mm round tube 8mm x 1mm round tube If you need brass pipes, click here (brass pipe Ms63)

Variants from €9.50*
€10.80*
This website uses cookies to ensure the best experience possible. More information...