Worldwide shipping
Shipping with DHL
05722/892102
info@bengs-modellbau.de

deburring head HSS 90 ° countersink

Product information "deburring head HSS 90 ° countersink"

With the 90 ° deburring head made of HSS steel, you can also deburr very small holes cleanly and quickly. The deburring head is clamped in a handgripper handle (not included in the scope of delivery) and can then be rotated by hand. The countersinks are sharpened, so you can deburr holes from 0.5mm upwards. You do not need a machine or device. One can take the deburring head with the handle in the one hand and the workpiece in the other hand. The deburring head is particularly well suited for technical modeling. Bengs Modellbau has been using the deburring head with the head diameter 6.30mm for years.

Delivery without grip (here you come to the handle)

The following deburring head HSS 90 ° countersink diameters are available:

  • Deburring head HSS 90 ° Head diameter: 6.30mm
  • Deburring head HSS 90 ° Head diameter: 8,30mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Blade hand deburring tool
Blade hand deburring tool small Hand burr handle with rotatable, replaceable blades. Easy handling, the blade of the Entgraters adapts itself automatically to the contours of the workpiece. The hand deburrer is made of break-resistant plastic. The hand tiller small is particularly suitable for fine work in model building on all materials. We supply the hand tiller small with a blade. Blade hand deburring tool universal The universal hand deburrer with a standard blade is suitable for deburring sheet metal, pipes, milling parts and rotating parts. The universal deburrer is suitable for all materials. The hand deburrer comes with a blade. We recommend this handle for the deburring head 90 °. Universal handgripper is made of aluminum. Here you come to the deburring head Hand taps are suitable both for deburring bores and for deburring edges on components. You can deburr brass, copper, steel, stainless steel, plastics and aluminum with our hand deburrers. You can also order spare blades for hand trenches in our shop. Just select the replacement bell.
Product number: 3142

Variants from €3.40*
€14.00*
Tip
high-alloyed silver solder 1mm / 1,5mm
We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results. The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder. Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long. 1mm or 1.5mm diameter Silver solder bars L-Ag55 (55% silver) Working temperature 630 ° C Bengs Modellbau has used this silver solder bars for years.  
Product number: 3131

€4.70*
Blade hand deburring tool
Blade hand deburring tool small Hand burr handle with rotatable, replaceable blades. Easy handling, the blade of the Entgraters adapts itself automatically to the contours of the workpiece. The hand deburrer is made of break-resistant plastic. The hand tiller small is particularly suitable for fine work in model building on all materials. We supply the hand tiller small with a blade. Blade hand deburring tool universal The universal hand deburrer with a standard blade is suitable for deburring sheet metal, pipes, milling parts and rotating parts. The universal deburrer is suitable for all materials. The hand deburrer comes with a blade. We recommend this handle for the deburring head 90 °. Universal handgripper is made of aluminum. Here you come to the deburring head Hand taps are suitable both for deburring bores and for deburring edges on components. You can deburr brass, copper, steel, stainless steel, plastics and aluminum with our hand deburrers. You can also order spare blades for hand trenches in our shop. Just select the replacement bell.
Product number: 3141

Variants from €3.40*
€7.20*
Satin wheel
These satin wheel are available in fine, medium and coarse grain sizes. You can use these satin wheel to clean the surface or the material you have started. Optimum cleaning of the satin wheel also brazed components but also to remove a rust or oxide layer on small components in model building, the satin brushes are suitable. The grinding wheel are fixed on the mandrel. The wheels can easily be clamped into the chuck of a fast grinder, for example Dremel or Proxxon. We use the satin wheels to clean parts soldered with silver solder. Characteristics of Satin wheel: Diameter Satining wheel: 22mm Shank: 2.35 mm Manufacturer: Scotch
Product number: 3553

€2.80*