curved spoke flywheels

Bengs Modellbau

Geschwungenes Schwungrad für Modellbaumotoren

Präziser gefräst der Schwungräder für den Modellbau

€37.50*

Prices incl. VAT plus shipping costs

No longer available

Product number: 6019

Product information "curved spoke flywheels"

The curved flywheels are also produced in our own production. They have a filigree look and look very good on both flame eaters, Stirling engines and steam engines. The flywheels have not yet been completely finished. However, only a few residual work such as the scoring bore is still present in these flywheels. With this flywheel you can give your model an original true note. The flywheel with curved spokes is made of GG 25 and can be worked very well.

Dimensions of the 80mm flywheel milled with curved spokes:

Raw diameter: 81mm
Finish diameter: 80mm
Material: GG20
Width on the hoop: 15mm
Width at the waist: 16mm
Diameter of the collar: 14mm
Weight: 220g

schwungrad-80mm-geschwungene-Speichen

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Silikonschlauch eignet sich für viele Anwendungen im Modellbau

Silicone tube

Our silicone tube is highly flexible and has a temperature range -60 ° C to + 180 ° C and is slightly cloudy. The silicone hose can be used to connect a steam engine. The tubes are ideally suited for supplying your steam engines with compressed air or steam in the workshop, on model constructions or model building exhibitions. Silicone tube are also suitable as fuel lines for model-built motors due to their good resistance to chemicals. Another advantage of the silicone tubing is that it is transparent and you can always see if, for example, fuel or alcohol is in the line. The following silicone hoses are available: Innen Außen Wandstärke silicone tube: 2mm 4mm 1mm silicone tube: 3mm 5mm 1mm silicone tube: 3mm 6mm 1,5mm silicone tube: 4mm 6mm 1mm silicone tube: 4mm 8mm 2mm For each selected piece you get 1m silicone tube.We deliver you the ordered length of silicone tube always in the piece

Variants from €2.20*

€3.00*

Silberstahl Rundmaterial in verschiedenen Durchmessern

Silver steel 115 Cr V3

115 Cr V3 Silver steel round material is suitable for the production of shafts, piston rods or for the construction of crankshafts for steam engines and Stirling engines in model construction. The silver steel is hardenable and can thus also be used for heavily stressed tools, for example punch punches. We supply the 115 Cr V3 silver steel in 300mm sections. The silver bars are well suited for running in ball bearings. Features 115 Cr V3 silver steel Material No. 1.2210 bright drawn wear-resistant tool steel (hardenable) The orderable sections are 300mm long.

Variants from €3.20*

€4.30*

Silver steel 115 Cr V3

Variants from €3.20*

€3.30*

Leichtes Schwungrad 80 mm sehr sauberer guss

flywheel 80mm light

This flywheel has an outer diameter of 81mm, it has 12 spokes which are only 2mm thick and 3mm deep. Due to the filigree appearance, it is particularly suitable for Stirling engines and flame eaters. Of course, the flywheels are also suitable as wheels for a motor laffeet or a cannon-booster. The flywheels are produced in the lost wax process. The advantage of this casting process is that the casting has a very high quality and dimensional stability. Blisters are excluded in the lost wax process. The sprue has already been polished. The flywheel is cleaned and sandblasted. Dimensions of the 80mm flywheel: Raw diameter: 81mm Finish diameter: 80mm Width on the hoop: 15mm Width at the waist: 17mm Diameter of the collar: 13mm Weight: 180g Material: Cast steel (no gray cast iron)

€21.20*