Körner

Bengs Modellbau

€6.80*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Werkstoff

Hartmetallspitze verchromt

verchromt

Product number: 3251

Product information "Körner"

Kräftiger Achtkant-Schaft, Spitze blank. In der ganzen Länge gleichmäßig durchgehärtet. Durch speziell vergüteten Schlagkopf kein Absplittern am Körnerkopf. Sonderqualität, d. h. höchstmögliche Spitzenhärte − ca. 59 HRC − bei besonderer Zähigkeit.

100mm Gesamtlänge.

Werkstoff:

Chrom-Vanadium
Wahlweise verchromt mit eingelöteter Hartmetallspitze.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Verzinnungspaste zum verzinnen von größeren Bauteilen

Soft soldering paste

Soft soldering paste for brass, copper, steel and silver steel. The paste is applied thinly to the parts to be tinned and heated with a brazing lamp. For large-area soft soldering, it is optimal to tin- the parts beforehand. For example, we use the paste to pre-tine the cylinder and the mirror when constructing a model steam engine. The tinning paste can also be used optimally as a flux substitute. The soft soldering paste is excellently suitable as corrosion protection for steel parts. Bengs Modellbau uses the zinc paste for steel cylinders with a cooling water jacket. For example in the Flammenfresser Kurfürst. Stirring the paste before use is not necessary! The soft soldering paste may be diluted with water. Ready-to-use metal paste Contents: 50g Bottle with brush Click here for the modeling magazine: Soldering with soft solder paste and tin paste Soldering and tinning with soft soldering and tinning paste

Content: 0.1 Kilogramm (€102.00* / 1 Kilogramm)

€10.20*

countersink 90°

The conical countersinks with 3 cutting edges are sanded radially and the chip spaces are ground from the solid. The conical sinker is suitable for producing 90 ° countersinks. You can sink DIN 7991 countersunk screws here. The conical sinker is universally applicable for both steel and stainless steel as well as for non-ferrous metals such as brass and aluminum. The 90 ° counterbores have industry quality and should ideally be used in a stator drilling machine. Of course, you can also use the conical sinker with a hand drill or a cordless screwdriver. We can supply you with conical sinkers in particularly small diameters, which are very suitable for working in the field of technical modeling. Countersink 90° Maximum roundness accuracy 3 cutting industrial quality

€10.90*

Satin wheel

These satin wheel are available in fine, medium and coarse grain sizes. You can use these satin wheel to clean the surface or the material you have started. Optimum cleaning of the satin wheel also brazed components but also to remove a rust or oxide layer on small components in model building, the satin brushes are suitable. The grinding wheel are fixed on the mandrel. The wheels can easily be clamped into the chuck of a fast grinder, for example Dremel or Proxxon. We use the satin wheels to clean parts soldered with silver solder. Characteristics of Satin wheel: Diameter Satining wheel: 22mm Shank: 2.35 mm Manufacturer: Scotch

Variants from €2.70*

€2.80*

Schneidöl in kleinen Gebinden für den Modellbau

Cutting oil

For all machining processes that place high demands on a cutting and cooling lubricant. Particularly suitable for thread cutting, reaming, sawing, drilling, turning, scraping, punching and milling. Can be used for all types of steel, cast iron and stainless steel. Our cutting oil is also suitable for all non-ferrous metals, copper, brass, aluminum and their alloys. Using cutting oil significantly increases tool life. The cutting oil is chlorine-free and age-resistant. Content: 100ml

Content: 0.1 Liter (€59.00* / 1 Liter)

€5.90*