Cotter pin punch set with guide sleeve in a slim design, with corded guide sleeve and hardened insert mandrel. Size 0.9 − 1.4 - 1.8 - 2.4 - 2.8 - 3.9 with loose guide sleeve − Size 4.9 and 5.9 with fixed shaft. Ideally suited for technical model making. The pin punch set is of industrial quality. Material: Chrome vanadium steel.

We provide you with combination wrenches with particularly small wrench sizes specifically for technical model making. The combination wrenches are made of chrome vanadium steel and are therefore extremely hard and suitable for even the toughest use. The combination wrenches are of industrial quality.Combine wrenches made of chrome-vanadium steel, chrome-plated Wrench size 3mm  Wrench size 4mm  Wrench size 5.5mm  Wrench size 7mm 

Marking gauge analog This sturdy analogue marking gauge in stainless steel version is outfitted with a replaceable hard metal-mounted tear-off needle. The resolution of the dial gauge is 0.01mm. The largest dimension to measure is 310mm. Due to the adjustment wheel attached to the back, every dimension can be set very quickly and cleanly. The marking unit can be fixed by means of a locking screw. The analog dial gauge has a diameter of 55mm and is therefore very easy to read. The dial gauge is rotatable. A further great advantage with the analog variant of the marking gauge is that it does not need batteries. The 2 counters for full millimeters can be set to zero. If you want to draw a hole pattern with only the hole spacing, place the needle in the center of the workpiece, zero the counters, and move the needle to the desired height up and down. Digital marking gauge The stainless steel digital marking gauge has a replaceable hard metal pin. The division of the digital scale is 0.01mm. The largest dimension to measure is 310mm. The marking unit has a second carriage for fine adjustment. Both slides have a fixing screw for fixing. The digital unit can be changed from mm to inch. In addition, an absolute zero point and an incremental zero point can be set. The incremental zero point is required if you want to draw a hole pattern in which only the hole distances are dimensioned. The needle in the center of the workpiece will have incremental zeros, and now move the needle to the desired height up and down. After that, you will return to the absolute measure and you have again the distance between the drawing pin and the marking plate.    

Präzise Nachschärfung mit der Diamantflachfeile Mit dieser hochwertigen Diamantflachfeile schleifen Sie mühelos HSS Stahl oder Hartmetallklingen nach. Herkömmliche Feilen sind für diesen Zweck ungeeignet – diese Diamantfeile ermöglicht eine einfache und präzise Nachbearbeitung. So bleibt Ihre Frässcheibe dauerhaft scharf und einsatzbereit. Die Diamantfeile hat eine Körnung von K600.Für folgende Anwendungen geeignet:- Hartmetall Drehstähle- HSS und Hartmetall Fräser- Scheren, Messer und andere Werkzeuge

Diamond step file 4mm, 4.8mm and 6.5mm Diamate file with 3 steps in diameters 4.0/4.8/6.5 mm for filing shaped steel made of HSS or carbide. The diamond round file is perfect for sharpening all common chainsaw chains. The diamond file is also suitable for sharpening the Kaindl Woodcarver, as well as for sharpening carbide teeth thanks to the diamond coatingn.Can also be used in a cordless screwdriver by removing the file handle. diamond round file 4.8mm This round diamond file has a continuous diameter of 4.8mm. With this file, the file tang is firmly connected to the handle. Of course, this diamond file also has the usual Kaindl quality. Because it has the same diameter throughout, it is more suitable for producing radius steels made of HSS.